L-type Compressor Specification
L-type compressor is an angle compressor with compact construction and good dynamic balance.
Each crank possesses at most one bell crank and can be equipped with more than two connecting bars. the crank is simple, short and can apply rolling bearing.
the resultant force of each column's first ordered inertia force can be partially or full equilibrated by the balanced weight on the cranks, so as to achieve high running speed and fine dynamic balance.
L type Compressor not only poossesses the advantages of angle compressors,but also has its own strong points in that it runs more stable than V-type and W-type. 
Note:
1, in addition on the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement.
2, Clients' inquiries should contain related parameters 
A. the gas compression medium 
B. the flow rate: _____Nm3/hr
C. Inlet pressure: _____ Bar
D. Discharge pressure: _____ Bar
E. Inlet temperature
F. Cooling water temperature as well as other technical requirement.
Besides general gas such as air, the compressed medium may also include flammable and explosive gas, such Natural Gas and Coal Gas as well as special gas which are toxic and corrosive. KEEPWIN has taken a series of technical measures in aspects such as structure material, explosion prevention, anto-control and protection to guarantee safety and reliability.
Products are widely used in variety of industries such as Petroleum, Chemical textile, Gas Separation, Metallurgy Mine Machinery.

P type Diaphragm Compressor Technical Parameters
No.	Model	Compressed medium	F.A.D (Nm3/min)	Inlet Pressure  ( Mpa)	Exhuast Pressure  (Mpa)	Power  (KW)	Speed R/min	Dimension (LWH)mm	N.W  Weight (t)	Voltage V
1	4LW-6/22	Propylene gas	6	Micro positive pressure	2.2	75	420	2658x1180x3058	3	380
2	4L-11.3/5~14	Petroleum gas	11.3	0.5	1.4	160	485	2435x1436x2460	2.5	380
3	4LW-7/22	Propylene gas	7	Micro positive pressure	2.2	75	420	2522x1180x2982	3	380
4	4L-20/9	Coal gas	20	Micro positive pressure	0.9	132	420	2508x1180x3090	3	380
5	4LW-6/22-I	Propylene gas	6	Micro positive pressure	2.2	75	420	2658x1180x3058	3	380
6	4L-21/1.6~24	Petroleum gas	21	0.16	2.4	160	420	2598x3400x3058	5.5	380
7	4L-20/10	Coal gas	20	Micro positive pressure	1	160	420	2440x1255x3090	3	380
8	4LW-7/17	Trifluoroethane gas	7	Micro positive pressure	1.7	75	420	2890x1380x3120	5	380
9	4LW-7/22-II	Propylene gas	7	Micro positive pressure	2.2	75	420	2890x1380x3120	2	380
10	4LW-13.5/20	Coal gas	13.5	Micro positive pressure	2	160	420	3410x1200x3200	6.5	380
11	4LW-10/22-I	Propylene gas	10	Micro positive pressure	2.2	110	420	2480x1250x3090	2	380
12	4LW-8.4/24	Vinylidene Fluoride Compressor	8.4	Micro positive pressure	2.4	110	420	3550x1300x3300	2	380
13	4L-20/9-III	Coal gas	20	Micro positive pressure	0.9	160	420	3200x1300x3150	2.8	380
14	4LW-20/0.8~7	Coal gas	20	0.08	0.7	160	420	3200x1300x3150	2.8	380
15	4LW-6/22-IV	Propylene gas	6	Micro positive pressure	2.2	76	420	3250x1300x3200	2.8	380
16	4LW-12.5/22-IV	Propylene gas	12.5	Micro positive pressure	2.2	132	485	2700x3160x3060	2.6	380
17	4L-17/10	Coal gas	17	Micro positive pressure	1	160	420	2800x3160x23060	2.6	380
18	4LW-10/1218	Petroleum gas	10	1.2	1.8	160	420	2770x1060x2885	2.1	380
19	4L-36/3~19	Natural gas	36	0.3	1.9	160	420	2570x3250x2855	2.1	380
20	3LW-10/0.26	Synthetic tail gas	10	0.02~0.04	0.6	75	420	2920x1250x3140	2.8	380
21	3LW-10/0.16	Synthetic tail gas	10	0.01~0.02	0.6	75	420	2920x1250x3140	2.8	380
22	3LW-11.4/0.15.6	Feed gas	11.4	0.01	0.55	75	485	2920x1250x3140	2.6	380
23	3LW-10/0.16-I	Synthetic tail gas	10	0.01~0.02	0.6	75	420	2920x1250x3140	2.6	380
24	3LW-10/6-I	Natural gas	10	0.005~0.015	0.6	75	450	2920x1250x3140	2.1	380
25	3LW-30/12	Nitrogen	30	0.1	0.2	75	485	2680x1450x3080	2.8	380
26	3LW-13.3/0.35	Trichlorosilane	13.3	0.02~0.05	0.5	75	485	2970x1150x3380	2.6	380
27	3LW-9/1.520	Natural gas	9	0.15	2	75	485	2480x1200x3350	2.6	380
28	3LW-7.5/116	Water gas	7.5	0.01~0.25	1.6	75	485	2900x2670x3000	2.1	380

Welcome to join us!
We Consider Our Customers as Our Friends and Families, and We do Believe in the Win-Win Situation for Building up Long-Term Relationship. 
Innovation
    Provide innovative, stable products and services.
Quality
    Deliver consistently superior performance and pursue every possible improvement. 
Agility
    Identify emerging trends and act quickly to acquire new opportunities.
Customer Satisfaction
    Anticipate customer needs and exceed their expectations.
Warranty
Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing.