| Power Source: | Electric Blower |
|---|---|
| Pressure: | High Pressure |
| Type: | Centrifugal Blower |
| Application: | Air Blower |
| Brand Name: | AP&T |
| Rated Voltage: | 220v |
| Model Number: | AP-DC2453 |
| Place of Origin: | China (Mainland) |
| Model: | AP-DC2453 |
| Input Voltage: | AC220V |
| Power: | 10W |
| Effective working range: | 450*300 |
| Discharge speed: | 2.5S |
| Noise: | 35db |
Quick Details
Specifications
Desktop Mini AP-DC2453 Ionizing Air Blower for Eliminating Static
General
AP-DC2453 ionizing air blower is one of the ionizing blower product series manufactured by Shanghai Anping Static Science&Technology Co.,Ltd.
AP-DC2453 ionizing air blower applies DC current ion synchronous transmitting technology. High volume of positive and negative ions are generated by two independent transmitting electrode with direct current corona discharge and arrive the object surface where the static to be eliminated.
AP-DC2453 is widely used in electronics,Plastic,Chemical,Printing and optics industry etc.
2. Features
(1)Elaborate appearance and easy to install.
(2)Able to be installed inside devices with good static remove effect.
(3)Low power consumption with long product life.
(4)Good circuit stability and reliability.
(5)Must equipped with AP-DC12V power generator.
3. Specification
Model AP-DC2453
Input voltage AC 220V/50HZ 110V/60HZ
Power 6.5W
Ion balancing 10V(150mm from air outlet)
Discharge time 2.5s (150mm from air outlet)
Effective scope 120500mm (L*W)
Air volume(Adjustable) 31.1 CFM
Noise 35db (150mm from air outlet)
Ozone thickness 0.01ppm (150mm from air outlet)
Working temperature 0C - 50C
Gross weight 480g
Net weight 420g (include external power gnerator)
Dimension 1108055 mm (L*W*H)
4. Installation
When using AP-DC2453 ionizing air blower,It should be located close to the working area (100 300mm from the object to be static eliminated). the air outlet of the ionizer should aim the object. When using the stand of the air blower, it should be fixed on steady and plain surface such as wall or rack with screw or drawbolt. by screw the knob on both side of the trestle the horizontal angle can be adjusted so that the optimal effect of static removing can be achieved.
Operational instruction:
(1)Insert the power cord to the power socket at the back side of the blower.
(2)Switch on the power.
(3)Air volume can be adjusted by screw the air volume knob.