Surface Finishing: | Electroless nickel over Immersion Gold (ENIG) |
---|---|
Board Thickness: | 0.8mm |
Copper Thickness: | 1.5 oz |
Base Material: | RO4350B 30mil |
Brand Name: | Bicheng Enterprise Limited |
Min. Line Spacing: | 78 mil |
Min. Line Width: | 30 mil |
Min. Hole Size: | 0.8mm |
Model Number: | BIC-021-V21 |
Place of Origin: | China (Mainland) |
Solder Mask Color: | Green |
Colour of Component Legend: | White |
TEST: | 100% Electrical Test prior shipment |
Quick Details
Specifications
Brief Introduction
Just as its name implies, high frequency is that the frequency is relatively high, generally
Refers to the frequency of >=300 MHz (i.e. Wave length <=1m), that is, the usual radio
Frequency band. the electromagnetic wave of frequency >=1GHz is named microwave.
Typical frequencies for wireless applications:
* Current: 0.9GHz - 2GHz
* 3G systems: 2.5GHz
* Bluetooth: 2.5GHz
* GPS: 12.6GHz
* LMDS: 24GHz and 40GHz
* Automotive: 77GHz
Market: RFID, Wireless communications, base station and antenna, amplifier, military products,
Consumer electronics.
High frequency printed circuit board or microwave PCB refers to the printed circuit board
Made on the high frequency (microwave) substrate copper clad plate. the common types
Are: Double-sided board, multilayer board and mixed structure.
Mixed structure includes high performance special substrate, PP sheet + ordinary performance
Board and PP sheet mixed pressing board; high frequency substrate + ordinary FR4 substrate;
High frequency substrate + metal base etc.
PCB Case: 2 Layer RF PCB RO4350B PCB 30 mil 1oz
Immersion Gold
(Printed circuit boards are custom-made products, the picture and parameters shown are
Just for reference)
General description
this is a type of high frequency PCB built on RO4350B 30 mil substrate for the application
of antenna. It's a 2 layer RF PCB board at 0.8 mm thick. It's immersion gold finish with green
Solder mask and white silkscreen. It's fabricated per IPC 6012 Class 2 using supplied Gerber
Data. Each 10 boards are packed for shipment.
Features and benefits
the dielectric constant (DK) is low and stable, so the signal transmission is good without
Delay.
Delamination of copper foil will not be caused by the change of cold and heat due to the
Consistency with the thermal expansion coefficient of copper foil.
Low water absorbability influences dielectric constant and dielectric loss less at damp.
SMT process is resistant to reflow soldering, resistant to rework due to gold pads.
Meeting your printed circuit board needs from PCB prototyping to mass volume production.
Engineering design prevents problems from occurring in pre production.
Competitive price
UL conformed
Customer complaint rate: <1%
Application
Low noise amplifier, VHF radio, Relay Stations, Power amplifier
Parameter and data sheet
Variety of PCBs
Aluminum drill
Just as its name implies, high frequency is that the frequency is relatively high, generally
Refers to the frequency of >=300 MHz (i.e. Wave length <=1m), that is, the usual radio
Frequency band. the electromagnetic wave of frequency >=1GHz is named microwave.
Typical frequencies for wireless applications:
* Current: 0.9GHz - 2GHz
* 3G systems: 2.5GHz
* Bluetooth: 2.5GHz
* GPS: 12.6GHz
* LMDS: 24GHz and 40GHz
* Automotive: 77GHz
Market: RFID, Wireless communications, base station and antenna, amplifier, military products,
Consumer electronics.
High frequency printed circuit board or microwave PCB refers to the printed circuit board
Made on the high frequency (microwave) substrate copper clad plate. the common types
Are: Double-sided board, multilayer board and mixed structure.
Mixed structure includes high performance special substrate, PP sheet + ordinary performance
Board and PP sheet mixed pressing board; high frequency substrate + ordinary FR4 substrate;
High frequency substrate + metal base etc.
PCB Case: 2 Layer RF PCB RO4350B PCB 30 mil 1oz
Immersion Gold
(Printed circuit boards are custom-made products, the picture and parameters shown are
Just for reference)
General description
this is a type of high frequency PCB built on RO4350B 30 mil substrate for the application
of antenna. It's a 2 layer RF PCB board at 0.8 mm thick. It's immersion gold finish with green
Solder mask and white silkscreen. It's fabricated per IPC 6012 Class 2 using supplied Gerber
Data. Each 10 boards are packed for shipment.
Features and benefits
the dielectric constant (DK) is low and stable, so the signal transmission is good without
Delay.
Delamination of copper foil will not be caused by the change of cold and heat due to the
Consistency with the thermal expansion coefficient of copper foil.
Low water absorbability influences dielectric constant and dielectric loss less at damp.
SMT process is resistant to reflow soldering, resistant to rework due to gold pads.
Meeting your printed circuit board needs from PCB prototyping to mass volume production.
Engineering design prevents problems from occurring in pre production.
Competitive price
UL conformed
Customer complaint rate: <1%
Application
Low noise amplifier, VHF radio, Relay Stations, Power amplifier
Parameter and data sheet
PCB SIZE | 38 x 25mm=1PCS |
BOARD TYPE | |
Number of Layers | Double sided PCB |
Surface Mount Components | YES |
through Hole Components | NO |
LAYER STACKUP | Copper ------- 35um(1oz)+plate TOP layer |
RO4350B 30mil (0.762mm) | |
Copper ------- 35um(1oz)+plate BOT Layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 78mil/30mil |
Minimum / Maximum Holes: | 0.8/3.5mm |
Number of Different Holes: | 2 |
Number of Drill Holes: | 53 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | 0 |
Impedance Control | NO |
BOARD MATERIAL | |
Glass Epoxy: | RO4350B 30mil (0.762mm), Tg 288 |
Final foil external: | 1.5oz |
Final foil internal: | 0oz |
Final height of PCB: | 0.8mm 0.1 |
PLATING and COATING | |
Surface Finish | Electroless nickel over Immersion Gold (ENIG)( 1 " over 100 " nickel) |
Solder Mask Apply to: | Top,12micon Minimum. |
Solder Mask Color: | Green, PSR-2000GT600D, Taiyo supplied. |
Solder Mask Type: | LPSM |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | TOP |
Colour of Component Legend | White, IJR-4000 MW300, Taiyo Supplied. |
Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
VIA | Plated through Hole(PTH), Via tented |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" (0.15mm) |
Board plating: | 0.0030" (0.076mm) |
Drill tolerance: | 0.002" (0.05mm) |
TEST | 100% Electrical Test prior shipment |
TYPE of ARTWORK to BE SUPPLIED | Email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Variety of PCBs
Aluminum drill