Comparison of Environmental Protection Pneumatic recovery Sandblasting chamber's characteristics with Mechanical Recycling Sandblasting room

1, Low cost of integrated operation and energy saving.

Pneumatic recovery Sandblasting room mode with no transmission mechanism is adopted, and the failure rate is low and maintenance is free. Reduce the maintenance time of the shutdown, and reduce the loss caused by the shutdown and maintenance;

2, the honeycomb floor has a sand-back structure without digging pit, and the civil engineering cost and the construction period are greatly reduced;

3, the structure is simplified and the interlocking control can be used in each system control, which greatly improves the convenience of maintenance and repair.

4, the key wear parts are equipped with standard modules, which are easy to maintain and replace, thus avoiding heavy maintenance work.

5, the sandblasting chamber adopts the upper supplementary air, the lower part and the side part can carry on the dust suppression circulation mode. the dust always drains downward, the visibility in the room is high, the working environment is good, the quality and efficiency of sand blasting are guaranteed, and the physical and mental health of the workers is protected.

6, the whole sand absorbing floor can recover all the sand materials in an instant, and there is no residual sand material on the ground. The sand blasting room is clean and clean in the room, no manual cleaning is required, and the working time is saved. Pneumatic pipe back sand, abrasive recovery up to 99, easy to clean the abrasive. Traditional mechanical recovery (or scrape floor) sandblasting room is almost impossible to thoroughly clean and replace abrasives;

7, the body of sandblasting room is simple and beautiful, and the installation is convenient and flexible.

8, the whole technical performance of sandblasting room is advanced, dust emission meets and is lower than the national and local environmental protection requirements, and the environmental pollution is completely eliminated.

9.Comparison between air recycling and traditional Mechanical recycling: