| Brand Name: | Allotech |
|---|---|
| Alloy Or Not: | Is Alloy |
| Application: | thermal spraying |
| Type: | Drawn Wire |
| Standard: | AISI,ASTM,GB |
| Model Number: | 010 |
| Special Use: | Cold Heading Steel |
| Place of Origin: | China (Mainland) |
| Wire Gauge: | 1.6mm |
| Steel Grade: | 3Cr13 |
| Size: | 1.6mm (1/16 Inch) |
| Spool Type: | D 300 |
| Wire Weight: | 15kg Each Spool |
| Wire Type: | Solid Wire |
| Condition: | Half Hard |
| Surface: | Brightly |
| Coating Hardness: | 40~45 HRC |
| Equal to: | Sulzer Metcoloy 2 |
Quick Details
Specifications
Description
SS 420 is stainless steel wire, specifically designed for arc spray processes.SS 420 forms a dense, well bondedcoating, with excellent wear resistance and good corrosion resistance. It is widely used for machine elements repair, dimensional restoration, and wear resistant application. SS 420 low shrink rate characteristics, allows for increased coating thickness on parts requiring heavier coatings. It can equivalent to: Tafa 60T, Sulzer Metco Metcoloy 2.
Applications
Paper Roll
Parts Restoration
Corrosion / Wear
Product Details
Chemical composition:
Grade |
Chemical composition(%) | ||||
Cr |
Si |
Mn |
C |
Fe | |
SS 420 |
13.0 |
1.0 |
1.0 |
0.3 |
Bal |
Typical Characteristics:
Typical Hardness |
Bond Strength |
Deposit Rate |
Deposit Efficiency |
HRC 40-45 |
6500 psi |
10 lbs /hr/100A |
70% |
Sizes & Packaging:
Diameter |
Packaging |
Wire Weight |
1/16" (1.6mm) |
MIG (D 300) |
15kg((33 lb)/spool |
Note that special sizes, or packing requirements are available on all requests.
Specifications:
420 SS
