Multi-wire Drawing Machine
Usage
Our multi-wire drawing machine was designed to greatly increase production capacity compared to standard drawing equipment. the drawing line can draw up to 8 copper wires simultaneously. this efficiency increase is invaluable to high capacity wire producers.
Parameters
| Inlet diameter |
2.0- 2.6 mm |
| Outlet diameter |
0.15- 0.70 mm |
| Number of produced wires |
8 x copper bare i.e. Copper tinned(1 Levels, with 8 wires) |
| Drawing speed |
Max. 28 m/s |
| Drawing passes |
Max. 22 |
| Drawing rings |
100mm with 8 grooves, for separate and parallel wire guidance Material: tungsten carbide or zirconium oxide |
| Wire elongation |
11 x 25% / 5 x 19.44 % /3 x 9.04% Adjustable and quick die change |
| Drawing dies |
Max. 28mm alternatively = max. 25.4 mm max. 12 mm thickness |
| Compressed air supply |
6 bar overpressure (7 x 105 PA), water- and oil free |
| Bobbin |
DIN 630 ( Drawing will be provided by users) |
| Operation direction |
from left to right |
| Noise level |
< 85 dbA (Except for main motor) |
| Production efficiency |
8 x 0.150mm at v = 28.0m/s
8 x 0.203 mm at v = 25.0m/s
8 x 0.250 mm at v = 23.0m/s
8 x 0.300 mm at v = 15.0m/s
8 x 0.400mm at v = 12.0m/s
Production efficiency for tinned wires at production speeds reduced by about 20% |
