THe machine is a special equiprnent for machining deep cylindrical hole of workpieces,It suitable for boring the cylindrical workpiece,when boring the hole,the oil is supply from the guide carriage,and take the chips from the cutting area to the equiprnent of chip conveying  on the headstock,the drilling method is the internal removal chip(BTA method),when drill,the oil is supply frorn the guide carriage,and take the chips from the cutting area to the equiprnent of chip conveying in the back of machine.

     the machine is controlled by PLC, the reciprocating movernents of guide carriage and feeding carriage are controlled bv the servo motor, the drive using racks, the racks is installed in the middle of the guide rail of the machine tool, to ensure long movernent feeding transmission accuracy and rigidity,the protection on the two sides of the bed body and the use of the ground oil tank structure improve machine tool environrnent, the Machine can be equipped with automatic or manual expansion efficient tool,

It greatly improves the machining efficiency.

     the machine is a kind of deep hole boring machine with easy to operate and control, high efficiency and environmental friendly.

ITEM	FZT10  FT10	FZT20 FT20
the range of drilling diameter	20mm60mm	40mm80mm
the range of boring diameter	40mm120mm	40mm200mm
the hight of  center	400mm	400mm
theRange of boring depth	10005000mm	100010000mm
the diameter of chucks	400mm	400mm
workpiece clamed Dia.Range of stead rest	50mm400mm	50mm400mm
range and kinds of spindle speed	501000r/min 3 grades12kinds (50-1200r/min 3 grades stepless)	501000r/min 3 grades12kinds (50-1200r/min 3 grades stepless)
the power of  main motor	N=15kW(N=22kW servo motor)	N=30kW(N=37kW servo motor)
range of feeding speed	52000mm/min (stepless)	52000mm/min (stepless)
feeding motor	N=4.5kW servo motor	N=4.5kW servo motor
guide carriage motor	N=6.7kW servo motor	N=6.7kW servo motor
the power of cool pump motor	N=5.5kW n=1440r/min(2 group)	N=5.5kW n=1440r/min(4 group)
rated pressure of  cooling system	2.5MPa  6.3MPa	2.5MPa
the flow of cooling system	80 180 280L/min	100 200 300 400L/min

Standard Accessories

   1.FZT10 has a drilling box with 15kW power and the speed is 60800r/min


   2.FZT20 has a drilling box with 15kW power and the speed is 40500r/min

   3.the above machines can equipped the CNC system such as siemens 808D or FANUC system.