the machine is suitable to process all kinds of small and middle size shaft and plate workpiece and could also turn various threads,circular cone,inside and outside surface of revolved body.this machine is widely used in sanitary,valve,electrical appliance, instrument, automobile, motorcycle,bearing and so on.

    CNC lathe features:

1. Higher accuracy Taiwan linear guide ways
   
2. Higher speed spindle unit.
   
3. Higher rigidity cast iron.
   
4. Integrated automatic lubrication
   
5. One piece casting slant bed.

SPECIIFICATION		TSL-25	TSL-36	TSL-36A	TSL-46	TSL-46A	TSL-56	TSL-60
the main Parameter	Bed structure	Slant bed 45one piece casting	Slant bed  30one piece casting	Slant bed  30 One piece casting	Slant bed  30one piece casting	Slant bed  45one piece casting	Slant bed  30one piece casting	Slant bed  30one piece casting
	Guide way type	Linear guide	Linear guide	Linear guide	Linear guide	Linear guide	Linear guide	Linear guide
	Max.Swing over  bed(mm)	220	360	360	460	460	560	600
	the diameter of Max.Processing(mm)	220	360	360	400	400	450	450
	Max.Processing overturret. Diameter(mm)	90	120	120	170	155	210	210
	Max.Processing Lenth(mm)	200	290	250	350	210	500	500
	the distance of two tops	No tailstock	No tailstock	No tailstock	370	No tailstock
Headstock and chuck parameter	Spindle nose	A2-4(5)	A2-5(6)	A2-5(6)	A2-5(6)	A2-6(8)	A2-6(8)	A2-6(8)
	the power of main motor(kW)	2.2/3	5.5	5.5	5.5/7.5	7.5/11	11/15kW	11/15kW
	Spindle speed(rpm)	6000	6000	5000	4000/5000	4200	4200	4200
	Spindle bore(mm)	36	56	55	56	66	66	66
	Bar capacity(mm)	26	45	45	42	55	52	52
the feeding System Parameter	X/z axis screw  specification	2510/2510	3208/3208	3210/3210	3210/3210	3210/4010	3210/4010	3210/4010
	Max. Travel of X axis(mm)	300	400	400	210	440	250	250
	Max. Travel of Z axis(mm)	200	300	300	400	370	610	610
	X axis feed Motor torque Nm)	5	7	7	9	7	11	11
	Z axis feed Motor torque Nm)	5	7	7	9	7	11	11
	X/z axis linear guidespecification	25/30	30/30	30/30	35/35	35/35	45/45	45/45
	X/z axis Connection method	Direct Connection	Direct Connection	Direct Connection	Direct Connection	Direct Connection	Direct Connection	Direct Connection
the turret  parameter	Turret type	Optionl	Optionl	Gang type tool	CLT-80-8/12T	Optionl	CLT-100-12T	CLT-100-12T
	Gang type tool Post size(mm)			540*270
	Hight of turret  center	50	63		80	80	100	100
the tailstock  parameter	Diameter of tailstock sleeve				65		80	80
	Taper of tailstock sleeve				MT4		MT4	MT4
	Travel of tailstock sleeve				80		80	80
	Travel of Tailstock				300		450	450