Special Feature
10.4" TFT screen (Sharp brand), all parameters are clearly showed.

Metal frame, with plastic spray, durable and lasting.

Double vaporizer station, selectatec compatible.

Classical Flowmeter of 4 tubes, with O2/N2O linkage device.

Could be easily upgraded with functions: eg adding Multi-parameter Monitor, CO2 Monitor, AMIS System.

Use advanced differential pressure sensor (Honeywell brand) to monitor tidal volume, the sensor probe is built inside the absorber, so as to avoid the affect of water vapor on tidal volume and improve the accuracy.

Technical Parameter

Patient type	Adult / Pediatric
Driven mode	Pneumatically Driven. Electronically Controlled
Respiration mode	IPPV / SIMV / Sign / Manual / Standby
Tidal Volume	50-1600ml
Respiratory frequency	1-65bpm
I:E ratio	4:1-1:4
Pressure Setting	1-60cmH2O
Trigger Pressure	-20-20cmH2O
Inspiration Plateau	0-55% Ti
Waveforms	P-t, F-t
Working Mode	Semi-open / Semi-closed / Closed system
Gas Supply Pressure	O2: N2O: 0.27Mpa-0.55Mpa

 Safety Function

When airway pressure reach 6kPa, APL valve will automatically release gas.

When airway pressure reach 6kPa, the Bellows will stop sending gas to patient.

Alarm parameters (Audible and/or visual signal):

  1)Airway Pressure high / low limit

2)FiO2 high/low limit

3)Minute Ventilation Alarm

4)Low O2 Supply Pressure(when O2 Supply Pressure is lower than 0.15Mpa, will arouse Audible Alarm)

5)N2O automatic Cutoff Alarm

Monitoring parameters (under Manual and Ventilation):

     Tidal Volume  /  Respiratory Frequency

     Minute ventilation  /  Airway Pressure

     Inspiration Plateau  /  Respiration mode  /  FiO2

Electrical Specification

Mains: 100-240V, 50/60Hz

Battery: 12V DC, minimum 120 min.(if with)

Power consumption: 50W

Dimensions

Size: 86*62*138cm

Optional

Patient Monitor

York Device

CO2 Monitor

AGSS

AMIS

Circle absorber heating function