Save Water, Time, Energy and Money JLayor Electric Tankless Water Heating Solutions

Did you know in most US homes the heating of water is the second largest energy expense after space heating. Typically, storage tank water heating can account for up to 30 -50% of the average home energy bill.

JLayor's Electric Tankless Water Heaters - 900 Series - revolutionizes water heating by providing instantaneous unlimited hot water at the point of use when needed. Best of all, our compact space saving design does NOT require venting and can be installed against the wall either under the sink out of sight or near the point of use. Suitable for residential and commercial.

JLayor Electric Tankless Water Heaters

European designed with over 40 years experience, JLayor products are constructed from the finest quality materials and components. Inner workings are constructed with heavy duty commercial grade heat resistant polymer reinforced with a fiber glass compound. this enhances product performance and increases consumer safety.

3.5kW/240V Point of Use - SINGLE SINK

Depending upon your climate and inlet water temps, the ATMOR 3.5kW is perfect for hand washing and can handle a single sink. the 3.5kW can heat up to.56 Gallons Per Minute (.56 GPM = 45 degree temperature rise). for optimal performance a 0.5 GPM sink faucet aerator is highly recommended.

There is a direct relationship between the flow rate and temperature rate. If the unit is used in a colder region, a higher temperature rise is required and the amount of fixtures will be limited than if used in a warmer region.

Water Heater Safety

When sized properly, ATMOR will provide endless hot water. Controlling the flow rate ( Gallons Per Minute) into the unit is essential to ensure a proper consistent temperature rise in order to meet your desired hot water needs. A Pressure Relief Device (PRD) is included with your unit and must be installed on your water heater inlet cold connection.