| Application: | Laser Engraving |
|---|---|
| Certification: | CE |
| Brand Name: | RN |
| Graphic Format Supported: | AI,BMP,DST,DWG,DXF,DXP |
| Applicable Material: | Acrylic,Crytal,Glass,Leather,MDF,Paper,plastic,Plexiglax,Plywood,Rubber,Stone,Wood |
| Condition: | New |
| After-sales Service Provided: | Engineers available to service machinery overseas |
| Dimension(L*W*H): | 137x105x89 cm |
| Model Number: | RN-L960 |
| Place of Origin: | China (Mainland) |
| Cooling Mode: | Water Cooling |
| CNC or Not: | Yes |
| Engraving Speed: | 0-15 m/min |
| Engraving Area: | 600*900mm |
| Laser Type: | CO2 |
Quick Details
Specifications
1. the guide rail is replace the inner slide rails double axis type HTK and HTK slider.
2. Self check switch,changed to the collision type,easy to replace.
3. Smoke exhaust port increases,and increases the area of smoke exhaust.
4. Front two smoke exhaust port, smoke exhaust reasonable.
5. the shell increased by 0.2mm.
6. Increase the water temperature display.
7. Y axis changed to double optical axis.
8. the plotter workpiece with CNC machining.
9. Change the C point of the laser head,easy to adjust the optical path.
10. Increased the normal operation of the laser tube viewing port.
11. on the right to increase the lead chain,more beautiful.
12. under the working platform for a fixture,on top there is a similar flatbed.
13. Thick water pipes to prevent the occurrence of poor drainage.
14. X shaft belt widened, replaced by 0.95cm.
15. Pastic wheel all changed to fire retardant material.
