| Brand Name: | Guantai |
|---|---|
| Wavelength: | 1310,1490,1550,850nm |
| Data Rate: | < 10% |
| warranty: | 1 year |
| Connector: | 10 year |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
4 and 6 fiber Fiber Optic Sleeve Single Ceramic Ribbon Splice Protector
Fiber Optic Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. Splice Protection Sleeves have a three parts design. A hot melt type adhesive inner tube and a reinforcement member are enclosed in a cross linked polyethylene heat shrinkable outer tube. this design ensures consistent and reliable protection of spliced optical fiber which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before shrinkage. Sealing structure make the splice free from influence of temperature and humidity in special environment.
- No influence on the fiber's transmission
- Splice point protection and intensity improvement
- Easy operation and reduction of the risk of managing fiber
- External tube clearly shows the status of connection
- Airproof configuration keeps the splice point's good resistance of humidity and temperature
- Operating temperature rang: -45~100
- Splice point protection and intensity improvement
- Easy operation and reduction of the risk of managing fiber
- External tube clearly shows the status of connection
- Airproof configuration keeps the splice point's good resistance of humidity and temperature
- Operating temperature rang: -45~100
Parameter
Applications
L Manufactured by cross-linked polyolefin, ceramic rod, and hot fusion tubing.
L Specially designed to rebuild the coating of fiber providing mechanical strength at the fusion joint area and keeping optical transmission properties.
Characteristics
L Moisture resistant and environmental protection
L Simple operation, avoid any damages to optical fiber during installation.
Operating temperature range
L Operating temperature: 45-100 /55-130
L Minimum shrink temperature: 80
L Minimum fully recovery temperature: 120
Technical data
| Performance | Test Method | Typical data |
| Tensile strength(MPa) | ASTMD 2671 | 18 |
| Elongation at break (%) | ASTMD 2671 | 700 |
| Density (g/cm2) | ISO R1183D | 0.94 |
| Dielectric strength (KV/mm) | IEC 243 | 20 |
| Volume resistance | ASTM0876 | 10 14 |
| Length changes (%) | ASTMD 2671 | 5 |
Package:
