Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485)

 

the M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

the M160T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

the M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it's reliable.


Features:

U Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

U Power supply 12~36VDC with over voltage and phase-reversal protection;

U Embedded Web server for configuration and management;

U Support Web realtime monitoring and Web debugging;  

U DO1 support PWM output;

U Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

U 8 optical isolated digital input, supports max. 10Mhz high speed pulse counter;

U 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;

U 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;

U High sampling frequency and special filtering strategy to ensure reliability;

U 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

U Supports register mapping function and extend I/O inquiry strategy;

U Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

U LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

U Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

U Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

M160T Specifications

Ethernet Remote I/O Module Specifications
Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	on: short to GND=1 off: open=0
Wet Contact (DI to COM)	on: 10 to 30 VDC=1 off: 0 to 3 VDC=0
Counter Frequency	Max. 10MHz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
Digital Output
Type	Sink or Relay
I/O Mode	DO or Relay or Pulse Output
Pulse Output Frequency	10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
over-Voltage Protection	50 VDC
over-Temperature Shutdown	175C (typical), 150C (min.)
Load Current	Max. 500 mA per channel
Digital sampling frequency	500Hz
Isolation	If DO is Sink type, then no isolation. If it is Relay, then is electrical isolation.
Analog Input
Type	Differential input
Resolution	12 bits
I/O Mode	Voltage / Current (jumper selectable)
Input Range	0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy	0.1% FSR @ 25C 0.3% FSR @ -10 and 60C 0.5% FSR @ -40 and 75C
Sampling frequency	20Hz
Built-in Resistor for Current Input	162 ohms
Isolation	Electrical isolation
Working Power Requirements
Input Voltage	12~36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
Power Output
Output Voltage	12~36 VDC
Output Current	139 mA @ 24 VDC
LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	under 205 g
Mounting	DIN rail or wall
Environmental Limits
Operating Temperature	Standard Models: -10 to 60C (14 to 140F) Wide Temp. Models: -40 to 75C (-40 to 167F)
Storage Temperature	-40 to 85C (-40 to 185F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	up to 3000 m

Standard Package

1xEthernet Remote I/O Module

1xUser Manual