Brand Name: | DC |
---|---|
Color: | white |
Sample: | free sample available |
appearance: | white liquid |
MOQ: | 200KG |
Model Number: | DC-C series 001 |
Place of Origin: | China (Mainland) |
Color: | White |
Mixing ratio (%): | 2-5 |
Pot life: | 30-40 mins |
Curing time: | 3-5hrs |
Hardness: | adjustable |
Shrinkage rate (%): | no more tan 0.25% |
Quick Details
Specifications
DC-C Series is a kind of
Room temperature vulcanized silicone rubber in condensation type. It's
Generally named as two part silicone rubber, Part A is a flowable liquid
Silicone, Part B is the curing agent (Tin catalyst). It's mainly used for mold
Making.
Application
DC-C Series silicone rubber
Is used for making molds of concrete stone, GRC, gypsum decoration, plaster
Ornaments, fiberglass products, polyester decoration, unsaturated resin crafts,
Polyresin crafts, polyurethane, bronze, wax, candle, and similar products.
Operation Instructions
Step 1: Prepare the original molds
Make your Original molds perfect. Fix it on a board. and fix the original mold on a board , then used four piece of board to enclose the original molds.
Step 2: Take 100 G parts A and add 2G parts B and mix them evenly.
Notes:Mold Making silicon rubber is a kind of flowing liquid,it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst.Pls Follow the step strictly:
1.Weigh the two part exactly by electronic weight. If not, for Example add too much catalyst, the operation time will be too fast to operate ,which will cause inconvenience to operate.
2.Mix part A and part B evenly. Otherwise the silicon rubber will be Partly solidified and this will give birth to difficulties in your final Operation. What's more, the finished molds will meet a short life. All of these Will cause a waste of silicon rubber.
Step 3: Vacuum pumping
without Exception, this step takes less than 10 minutes. Otherwise, it will cause, and no more further steps will be available.
Step 4: Pouring casting or Brush operation
Notes:1.for simple pattern products we suggest use pouring operation way, which will be Very easy to operate and demould. Pourable silicone require low viscosity which Will be easy to flow smoothly and easy to de-air.
2.for delicate pattern products We suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won't be easy to flow away and Easy to brush.
3.We sugges to set the silicone mold for Another 12 hours after demould before you put it into a large production.
Technical Parameters
(DC-C Series with different hardness from 10-40 shore A, different hardness has different application.
Characteristics
Good Operability, easy to demold
Moderate Hardness
High Tensile and tear strength
Cure at Room temperature
Good Flexibility
High Duplication times
Package
25KG/drum vacuum packing
for part A +1kg/ bottle catalyst for part B
200KG/drum packing for part
A +1kg/ bottle catalyst for part B
Shelf life
Twelve(12) months when Stored under dry and cool place by original package under 25
about our comapny:
There has two main Series of best selling silicone rubber in our company.
The DC-A Series Addition cure silicone rubber and The DC- C Series Condensation
Cure silicone rubber.
Why choose us?
1.Attractive price to help You save cost
2.High quality with stable Performance.
3.Free technical support and sample test to check the quality.
4.More than 10 years Experience of silicone rubber producing.
5.Relate products Purchasing assistance
6.China visiting Reception
7.Factory visiting Reception
8.New market Developing
9.New products research and Development
10.
11.Hardness can be Customized according to your requirement
12.Color and package could Be customized