Frequency range: 120GHz~130GHz, Frequency modulation sweep frequency width: 10GHz;

Measuring range: 0.1-50/100/150m;

Measurement resolution: 0.008m;

Accuracy: <1mm;

 Launch Angle: 1(with lens radome);

Dielectric constant range: 1.0100, Medium viscosity <1000cp;

Power supply: 9.0~42.0VDC(<5W) four wire or 110-250VAC, 50Hz/60Hz(<6W);

Signal output: 4~20mA (with HART/MODBUS/PROFIBUS*bus) or RS-485;

Site operation/: 2.6" inch Color screen / 4 key configurable;

Process temperature/humidity: -60~20095%RH; -60~1000(with antenna heat pipe/quartz isolation flange);

Housing material: Aluminium alloys single chamber or double chamber(220VAC Only with double chamber);

Antenna type:, PTFE/PEEK/PE, can choose Lens antenna guard/Anti-corrosive antenna/Antenna heat pipe/Quartz isolation flange;

Process pressure: -1~5MPa;  -1~32MPa(with quartz isolation flange);

: M20x1.5;

Recommend the cables: AWG18 or 0.75mm;

Protection grade: IP67;

: ExiaCT6Ga, ExdiaCT6Gb;

Installation type: M56x2 screw thread or DN50 flange;

 
2.Main Features

1. Not be affected by atmospheric precipitation;

2. the ambient temperature is -60C;

3. Being Installed on the outside of tank;

4. the antenna inside of the level transmitter is protected by fluoro plastic lens heating;

5. the measuring radiation is narrow, easy to install and measurement sensibility;

6. the accuracy of the level measurement can't be limited by the temperature of tank;

7. Evaporation and dust will not affect the measurement;

8. Boiling liquid level measurement;

9. Corrosive liquid level measurement, non-contact, non-corrosion, stable measurement;