|
Series |
A4VG_32 Series High Pressure Piston Pumps |
|
|
Specifications |
28,40,56,71,90,125,180,250 |
| Working pressure |
Nominal pressure 40 MPa, peak pressure 45 MPa |
| Control mode: |
Characteristic |
_Swashplate Axial Plunger Variable Pump for Closed Loop Hydrostatic Transmission |
| NV type, no control device |
|
| DG-hydraulic control, direct control |
_Flow rate is proportional to driving speed and displacement and can be variable steplessly. |
| EZ-Electric Two-Point Control, Switched Electromagnet |
|
| HD-hydraulic control, related to pilot pressure |
_the flow rate increases from zero to its maximum with the swashplate swing angle. |
| HW-Hydraulic Control, Mechanical Servo |
|
| EP-Electrical Control with Proportional Electromagnet |
_the liquid flow direction can be changed smoothly by making the swashplate swing over the middle. |
| DA - Hydraulic control, related to deceleration |
|
|
|
_Variable modes that are easily matched with various control and regulation systems; |
|
|
the pump is equipped with two relief valves at the high pressure oil side to protect the hydrostatic transmission (pump and motor) from overloading. |
|
|
High pressure relief valve also has the function of filling valve. |
|
|
_Built-in auxiliary pumps are used as refueling pumps and control pumps. |
|
|
_the maximum filling pressure is limited by a built-in filling relief valve. |
|
|
|
