Product Introduction

Gyradisc crusher crushes materials based on the lamination between particles. It's mainly applied to fine crushing of hard and medium hard ores and materials. the materials are pressed, impacted and ground between each other. It's used for artificial sand, fine, dense and cubic sand materials of bituminous concrete. It constitutes high-grade crushing production line together with other crushing equipment, widely applied in metallurgical, mining, construction, road construction, and cement industries.

Working Principle

Mixed and even coarse and fine materials continuously enter into rotary distributor through the tank and the feed box and then into the buffer chamber along the circumferential direction, evenly distributed in the receiving area. The distributor can control the feeding speed to ensure the stability of the inner layer of the crushing chamber. Materials oscillate with the cone and are controlled by the boss of the moving cone which enables them to go into the grinding chamber freely. At the beginning, materials are lifted by the moving cone liner, with discharging movement and being stuck between the liners. The moving cone leads to materials crushing by means of the grinding and the impact action among materials.

Performance Characteristics

1. More crushing and less grinding greatly improves the efficiency.

2. It's the physical action between particles that crushes materials instead of direction crushing between materials and the cone.

3. It's a new type fine crushing machine optimized and designed specially for ultrafine crushing.

4. It's used in three or four stage fine crushing.

Model

P	Crusher
Y	Cone
X	Gyradisc
XX	Crushing cone diameter, dm
XX	Throat Size, dm

Technical Parameter

Model	Specification		Recommended Granularity mm	Maximum Granularity mm	Capacity t/h	Main Motor Power kw	Reference Weight t
	Crusher Diameter mm	Throat Size mm
PYX-0613 PYX-0619	600	13 19	5~19	38	10~25	≦45	6.0
PYX-0911 PYX-0919 PYX-0925	900	11 19 25	5~19	38	55~65	≦75	11.5
PYX-1213 PYX-1219 PYX-1225 PYX-1232	1200	13 19 25 32	5~19	38	100~115	≦150	25.8
PYX-1619 PYX-1625	1650	19 25	5~19	38	160~180	≦220	75.0
PYX-2116 PYX-2125 PYX-2132	2100	16 25 32	5~19	38	230~270	≦315	100.0
Note 1: the weight in the chart excludes the motor, electric control equipment, hydraulic pressure station, and lubrication station. Note 2: the capacity in the chart is the design volume of the equipment which satisfies the following requirements: A) the water content is no more than 4% without any clay; B) the gradation of feeding granularity is proper with completely even feeding in the crushing chamber C) the feeding density is 1.6t/m3 and the compressive strength is no more than 160MPa and the rated power consumption is 80%.