Antifoaming agent for wastewater nonsilicon thix defoamer manufactuer
Defoamer-3.29
| |
|
|
| DEFOND |
| Low price for coking wastewater treatment defoamers |
| Manufacturer selling| customized products| Free samples |
| |
|
(1)Fast defoaming ability, lasting foam suppressing effect, small dosage, not any effect to the basic property of foaming system. |
|
| |
|
(2)Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side affect. |
|
| |
|
(3)Comparable with top quality product on market, while the price is much more affordable. |
|
| |
|
| Model No. |
|
BM-280/281 |
|
BM-282 |
| |
|
|
|
|
| Appearance |
|
Milk-white liquid |
|
Milk-white liquid |
| |
|
|
|
|
| PH Value |
|
5~8 |
|
5~8 |
| |
|
|
|
|
| Active content |
|
98% |
|
98% |
| |
|
|
|
|
| Solid content |
|
98% |
|
98% |
| |
|
|
|
|
| Viscosity(25℃) |
|
1000~1500mpa.S |
|
1000~1500mpa.S |
| |
|
|
|
|
| Remark: above data only shows the typical characteristic of this product, not represent the whole specification range. |
| |
|
| Application |
|
|
|
| Application1 |
Application2 |
Application3 |
|
| |
| Recommended dosage: |
1. Direct add this product into sewage system, it also can be used after dilute.
2. Recommended dosage: 0.03~0.4% for each ton of sewage, the optimal dosage should be determined through the actual test.
3. this product must be used immediately once diluted, otherwise it may appear the situation of delamination & demulsification, which will affect the product quality. and must add some stabilizer if need to long-term store the diluted product.
4. Welcome to contact us at anytime for any question. |
|
| |
  
|
| |
| |
