High Concentration Modified Cleaning Agent Polyether Defoamer
Product description
| |
|
|
| DEFOND |
| High concentration Modified silicone polyether defoamer |
| Manufacturer selling| customized products| Free samples |
| |
|
(1)Fast defoaming ability, lasting foam suppressing effect, small dosage, not any effect on the basic property of foaming system. |
|
| |
|
(2)Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side effects. |
|
| |
|
(3)Comparable with the top quality product on market, while the price is much more affordable. |
|
| |
|
Parameter
| Model No. |
|
BM-820/879 |
|
BM-804 |
| |
|
|
|
|
| Appearance |
|
Milk-white liquid |
|
Light yellow/Transparent liquid |
| |
|
|
|
|
| PH Value |
|
5~8 |
|
5~8 |
| |
|
|
|
|
| Active content |
|
95% |
|
95% |
| |
|
|
|
|
| Solid content |
|
98% |
|
98% |
| |
|
|
|
|
| Viscosity(25℃) |
|
1000~1500mpa.S |
|
1000~1500mpa.S |
| |
|
|
|
|
| Remark: above data only shows the typical characteristic of this product, not represent the whole specification range. |
| |
|
Application
| this defoaming agent is used in cleaning industry, the high-temperature vacuum or pressure pulp washing machine of chemical pulping in papermaking industry, strong base refining agent, pretreatment, chemical cleaning with the condition of high temperature and strong alkaline, high temperature and strong alkaline, aqueous biphasic system, metalworking fluid, building material, oilfield industry, etc. |
| |
|
|
Apply to cleaning agent. |
|
Apply to the pulping/pepper making industry |
|
Use storage instruct
| |
| Recommended dosage: |
Usage: Direct add this defoamer to the foaming system if it can be fully stirring in the foaming systems.
It's also dilutable, and if need to dilute this product, please contact us for the correct diluting method, do not dilute it directly with water, otherwise, it's easy to cause delamination and demulsification situation, which will affect the product quality.
Recommended dosage: According to different systems, the general dosage is 10~1000ppm, the optimal dosage should be determined based on the real foaming situation.
If using in pulp washing process, it's better to add this defoamer to the vacuum or pressure drum by measuring pump to remove foams.
If using in chemical cleaning or textile industry, it's better to add the defoamer to the product in advance, thus, it can well suppress foams forming. |
|
| |
