White hot melt adhesive for mouse catching hardboard

 

Application	Plastic/Paper Board for Mouse Trap
Feature	Odorless; Excellent tackiness; High flow point; Good wire drawing; Good resilience force
Appearance	Semi-liquid Glue Gel, Colorless-translucence
Viscosity	850±200 cps @ 160℃
Softening point	36.8℃
Flow Point	≥80℃
Usage guidance	1. Suggested operation temperature: 140~160℃.
	2. Can be run on the hot-melt spray coating,blade coating system..
	3. Clean-up procedure: You can consult to the equipment manufacturer, or clean the equipment by mineral oil at 120 ℃. Then flush it by the same type adhesive below 150 ℃.
Precautions	the property of glue adhesion will differ from the different surfaces of substrate and thickness of applied adhesive.
	Please keep the adhesive below 160℃during operation to keep the lowest danger of Flammable volatiles.
	during adhesive operation, make sure the air flow and any fire is prohibited.
Package	10kgs/bag, plastic bag is directly melted in the glue tank; 20Kgs/Carton; 160/180Kgs Bucket
Storage	2 years in dry and cool place