Company Index on m.ecvv.com

Quick Details

Classification:	Chemical Auxiliary Agent
Brand Name:	DEFOND
Usage:	Electronics Chemicals
Type:	circuit board cleaning defoamer
CAS No.:	9003-05-8
Classification:	Chemical Auxiliary Agent
Model Number:	BM-181/182/183
Place of Origin:	China (Mainland)
EINECS No.:	231-545-4
Other Names:	antifoaming agents
Product name:	PCB Board Cleaning Defoamer
Keywords:	circuit board cleaning defoamer
Application:	PCB cleaning
Appearance:	Transparent/ Translucent/ Milk white liquid
PH Value:	5~8
Viscosity:	800~1000mpa.s

Specifications

Best Sale Circuit Board Cleaning Anti Foam Agent

Defoamer-3.29

DEFOND

Best sale circuit board cleaning defoamer in china

Manufacturer selling| customized products| Free samples

(1)Strong defoaming and foam suppressing ability, low dosage, no effect to the basic property of foaming system.

(2)Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side effects.

(3) Comparable to the top quality product on market, while the price is much more affordable.

Model No.	BM-181/182	BM-183

Appearance	Transparent/ Translucent liquid	Milk white liquid

PH Value	5~8	5~8

Active content	95%	98%

Solid content	95%	98%

Viscosity(25℃)	1000~1500mpa.S	1000~1500mpa.S

Remark: above data only shows the typical characteristic of this product, not represent the whole specification range.

this organic silicone defoaming agent is mainly applying to the PCB board cleaning, electroplate, water treatment, metal cleaning, and the whole PCB production, such as etching, film-stripping, developing, wastewater treatment, etc.


Apply to PCB ink defoaming	Apply to offset ink defoaming	Applying to the film-stripping process of PCB board

Recommended dosage:

the most effective solution is to add this defoamer into the system before the foams formed.

the dosage concentration shall be determined through the actual defoaming requirement of the system.

Recommended dosage:in general situation, the starting dosage concentration is 0.3~0.5ml for per liter of bath solution, and then increasing the dosage based on the situation that the bath solution reach saturation for dissolving the dry film or wet film.