| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|---|
| Warranty: | 1 year |
| Voltage: | 380hz we can make it according to customers' Local voltage according t |
| Brand Name: | XBF |
| Condition: | New |
Quick Details
Specifications
High Quality Hot Sale Price for Mushroom Hot Air Heat Pump Oven
8.Our Service:
10.Our company
1.Product Introduction
with the rapid development of the economy, environmental problems are becoming more and more serious, and the conventional drying efficiency and high-cost drying methods are increasingly unable to meet the existing needs. the heat pump low-temperature sludge drying treatment system developed by Jiutian Machinery is used in the field of sludge drying treatment. the heat pump unit is used as the heat source for the drying sludge, and no fuel is consumed during the drying process so that transportation and fuel costs can be saved while avoiding fuel pollution to the environment.
2. Principle:the heat pump drying technology uses a working medium (such as ammonia, water, etc.) to evaporate under reduced pressure in the evaporator, so that the surface temperature of the evaporator is lower than the indoor air dew point, so that when the air flows through the evaporator, it is cooled and lowered below the dew point. When the excess steam in the air is condensed and precipitated on the surface of the evaporator, the condensed water is poured into the water tray and then drained into the water container by the drain pipe. after the liquid working medium is heated and vaporized, it is sent to the condenser through the compressor, and the condenser emits a large amount of latent heat of vaporization under high temperature and high pressure. When the air cooled in the evaporator passes through the condenser, the endothermic temperature rises, and is discharged in a dry state, and is mixed with the room air. Thereby reducing the indoor air humidity and achieving the purpose of drying and dehydrating.
3.Product Details Show:
4.Composition of heat pump drying system
1. Main machine (heating system): absorbs free heat from the air with little electric energy input, and USES it to dry materials.
2, drying room: used for placing materials, and insulation to avoid heat loss.
3. Circulating air system: bring heat to every corner of the drying room to raise the temperature of the drying room, and take away moisture from the materials.
4. Moisture drainage system (drying system): the purpose of drying is to discharge the moisture with high humidity in the drying room.
5. Waste heat recovery system: the drying system has a total of 3 waste heat recovery lines, which can minimize the loss of heat and achieve high efficiency.
6. Drainage system: condensate water is discharged to the outdoor to avoid increasing the humidity of indoor air.
7, programmable intelligent control system: according to the most appropriate drying process curve, automatic adjustment of temperature and humidity, drying time, intelligent operation.
5.the advantages of dryers
1. Main machine (heating system): absorbs free heat from the air with little electric energy input, and USES it to dry materials.
2, drying room: used for placing materials, and insulation to avoid heat loss.
3. Circulating air system: bring heat to every corner of the drying room to raise the temperature of the drying room, and take away moisture from the materials.
4. Moisture drainage system (drying system): the purpose of drying is to discharge the moisture with high humidity in the drying room.
5. Waste heat recovery system: the drying system has a total of 3 waste heat recovery lines, which can minimize the loss of heat and achieve high efficiency.
6. Drainage system: condensate water is discharged to the outdoor to avoid increasing the humidity of indoor air.
7, programmable intelligent control system: according to the most appropriate drying process curve, automatic adjustment of temperature and humidity, drying time, intelligent operation.
6.Product Picture:
XBF Single Drying Machine | ||||
Model |
Unit |
JK03RD |
JK06RD |
JK12RD |
Power input |
KW |
4.8 |
8.5 |
15.0 |
Power supply |
V/PH/HZ |
380V/3PH,50/60HZ |
380V/3PH,50/60HZ | |
Rated curent |
A |
9.6A(380V),22A(220V) |
17.0 |
30.0 |
Heating capacity |
KW |
10.5 |
21.0 |
42.0 |
Cooling capacity |
KW |
7.8 |
18.0 |
32.0 |
Dehumidity |
L/H |
12.0 |
25.0 |
50.0 |
Max temperature |
C |
75 |
75 |
75 |
Working condition |
C |
0-43 |
0-43 |
0-43 |
Electric shock protection grade |
I |
I |
I | |
Max.Exhause pressure |
MPa |
3.0 |
3.0 |
3.0 |
Noise |
dB(A) |
75 |
75 |
75 |
Power consumption/H |
KWH |
4.8 |
8.5 |
15.0 |
Electric heater |
kw |
3.0 |
6.0 |
12.0 |
Blowing type |
/ |
Horizontal blowing 360 | ||
Dimension of dryer |
MM |
1675*860*1280 |
1760*1060*1280 |
2120*1360*1590 |
Weight |
KG |
180 |
285 |
480 |
A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. after-sales service
1, Technical support for your installation, operation and maintenance.
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
for heat pump dryer parts---with plywood
for drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood
10.Our company
JiNan xinbeifa machinery equipment co., LTD. Has professional designers, experienced technicians and first-class processing equipment, for the manufacture of naive equipment identification a solid foundation. with years of experience, our company has independently developed a variety of expanded food equipment and front and rear end auxiliary equipment, the product sales throughout the country all provinces, cities, autonomous regions, more exports to Australia, the Netherlands, Pakistan, Malaysia, myanmar and other Asian, European, American countries.. Our company adhering to the "professional casting quality, integrity to win the future" business purposes;In the principle of mutual benefit and common development, based on a high starting point, large investment, high level of operation;Adhere to high standards, zero defects, refined production standards, ensure that every production link, to create a safe and high-quality brand.
