Energy-Saving Air Source Heat Pump Dryer Fruit Drying Machine

1.Product Introduction

 with the rapid development of the economy, environmental problems are becoming more and more serious, and the conventional drying efficiency and high-cost drying methods are increasingly unable to meet the existing needs. the heat pump low-temperature sludge drying treatment system developed by Jiutian Machinery is used in the field of sludge drying treatment. the heat pump unit is used as the heat source for the drying sludge, and No fuel is consumed during the drying process so that transportation and fuel costs can be saved while avoiding fuel pollution to the environment.

2.Vegetable Fruit Fish Grain Small Drying Oven Working Principle:

  the heat pump drying technology uses a working medium (such as ammonia, water, etc.) to evaporate under reduced pressure in the evaporator, so that the surface temperature of the evaporator is lower than the indoor air dew point, so that when the air flows through the evaporator, it is cooled and lowered below the dew point. When the excess steam in the air is condensed and precipitated on the surface of the evaporator, the condensed water is poured into the water tray and then drained into the water container by the drain pipe. after the liquid working medium is heated and vaporized, it is sent to the condenser through the compressor, and the condenser emits a large amount of latent heat of vaporization under high temperature and high pressure. When the air cooled in the evaporator passes through the condenser, the endothermic temperature rises, and is discharged in a dry state, and is mixed with the room air. Thereby reducing the indoor air humidity and achieving the purpose of drying and dehydrating.

3.Product:

4.Vegetable Fruit Fish Grain Small Drying Oven  Model:

Model	XBF-100AB/AB1	XBF-100DB1	XBF-100GB/GB1
Power	1.0kw	1.0kw	1.0kw
Highest wind tempetature	65C	65C	80C
Best wind tempetature	55C~63C	35C~55C	65C~78C
Suitable environmental temperature	-20C~+40C	-20C~+40C	-20C~+40C
Dewaterability	≥3.0kg/h  (T50C,M80%)	≥3.0kg/h  (T50C,M80%)	≥3.0kg/h  (T50C,M80%)
Tray Size(mm)	780*510*40	780*510*40	780*510*40
Size(mm)	1180*680*1820	1180*680*1820	1180*680*1820

5.Composition of heat pump drying system

 

1. Main machine (heating system): absorbs free heat from the air with little electric energy input, and USES it to dry materials.

2, drying room: used for placing materials, and insulation to avoid heat loss.

3. Circulating air system: bring heat to every corner of the drying room to raise the temperature of the drying room, and take away moisture from the materials.

4. Moisture drainage system (drying system): the purpose of drying is to discharge the moisture with high humidity in the drying room.

5. Waste heat recovery system: the drying system has a total of 3 waste heat recovery lines, which can minimize the loss of heat and achieve high efficiency.

6. Drainage system: condensate water is discharged to the outdoor to avoid increasing the humidity of indoor air.

7, programmable intelligent control system: according to the most appropriate drying process curve, automatic adjustment of temperature and humidity, drying time, intelligent operation.

6.the Advantages of Dryers

 

1, stable, not restricted by the weather: whether cloudy days and rainy days, day and night, wind and snow, all-weather stable operation.

2. Energy saving and high efficiency: using clean electric energy to work, the drying operation cost is only 40% of oil drying equipment, 60% of coal drying machine and 30% of electric heating drying machine, saving more than 60% of energy compared with ordinary drying equipment.A closed dehumidification mode is adopted, without discharging waste heat to the outside world.Patented level 3 waste heat recovery technology, rapid discharge of water while your heat loss.

3. Good effect: the finished product after drying has a good appearance;High active components;Uniform drying, 360 degrees without dead Angle drying.

4. Small footprint and easy installation: the equipment only needs a small installation site;Drying room on site assembly is simple and convenient.

5, intelligent, unattended: the touch screen programmable intelligent control system, a key to start the unit automatic operation, no need to turn over materials, no need to replace the baking tray and cart, no need for special guard

6, safety: the use of electrical separation technology, no risk of electric shock leakage, no inflammable fire, explosion and other dangers.

7.Delivery and Package
for heat pump dryer parts---with plywood
for drying chamber +trolleys
  If shipped with 20ft container or 40ft container, no packing
  If shipped with LCL( less than container load), packed in plywood

8.Our Services
A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. after-sales service

1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

9.Our Company

Jinan xinbeifa machinery equipment co., LTD. Has professional designers, experienced technicians and first-class processing equipment, for the manufacture of naive equipment identification a solid foundation. with years of experience, our company has independently developed a variety of expanded food equipment and front and rear end auxiliary equipment, the product sales throughout the country all provinces, cities, autonomous regions, more exports to Australia, the Netherlands, Pakistan, Malaysia, myanmar and other Asian, European, American countries.. Our company adhering to the "professional casting quality, integrity to win the future" business purposes;In the principle of mutual benefit and common development, based on a high starting point, large investment, high 

Level of operation;Adhere to high standards, zero defects, refined production standards, ensure that every production link, to create a safe and high-quality brand.