| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|---|
| Warranty: | 1 year |
| Voltage: | 380v |
| Brand Name: | XBF |
| Condition: | New |
| Certification: | CE ISO9001 |
Quick Details
Specifications
Air circulation uniform enErgy saving heat pump dryer for sea food Shrimp
1.Product Description
1. Use electronic temperature controller or digital display temperature controller to control temperature, and the temperature is accurate and reliable.
2, using tempered glass observation door, safe and reliable, easy to observe.
3, high temperature silicone rubber sealing strip, good sealing and thermal Insulation performance, good
1.Product Description
Structure: Integral
Side air supply, Integral back air supply, Integral upper air supply
Type: Open drying type
Name: Integral heat pump dryer side air supply type, Integral heat pump
Dryer back air supply type, Integral heat pump dryer upper air supply type
Heat Pump: 7P / 15P
We have many
Types of machines, such as tobacco heat pump dryer, split heat pump dryer,
Integral heat pump dryer, industrial heat pump dryer, closed heat pump dryer,
Fungus heat pumpDryer,Open heat pump dryer, wood heat pump dryer, food heat
Pump dryer, dynamic heat pump dryer
the heat pump drying technology uses a working Medium (such as ammonia, water, etc.) to evaporate under reduced pressure in the evaporator, so that the surface temperature of the evaporator is lower than the indoor air dew point, so that when the air flows through the evaporator, it Is cooled and lowered below the dew point. When the excess steam in the air is Condensed and Precipitated on the surface of the evaporator, the condensed Water is poured into the water tray and then drained into the water container by the drain pipe. after the liquid working medium is heated and vaporized, it Is sent to the condenser through the compressor, and the condenser emits a Large amount of latent heat of vaporization under high temperature and high Pressure. When the air cooled in the evaporator passes through the condenser, the endothermic temperature rises, and is discharged in a dry state, and is Mixed with the room air. Thereby reducing the indoor air humidity and achieving The purpose of drying and dehydrating.
3.Product Pictures
Drying Seafood:
Sea fish, Shrimp, Trepang, Hippocampi, etc
4.Products Details Show
5.the Technical Parametrs of Oven
Model |
Dimension(m3) |
Electricity Consumption |
Drying Capacity(kg) |
KLD-3P |
15 |
4 degree |
200 |
KLD-6P |
25 |
7 degree |
400 |
KLD-10P |
40 |
13 degree |
750 |
KLD-25KW |
5*1.6*3.4m |
Automatic tunnel drying 5t/d | |
KLD-50KW |
6*1.6*3.4m |
Automatic tunnel drying 10t/d | |
KLD-75KW |
7*1.6*3.4m |
Automatic tunnel drying 15t/d | |
KLD-100KW |
8*1.6*3.4m |
Automatic tunnel drying 20t/d | |
6.Dryer Features:
Compared with the traditional drying method, the Hot air drying equipment has the following features1. Use electronic temperature controller or digital display temperature controller to control temperature, and the temperature is accurate and reliable.
2, using tempered glass observation door, safe and reliable, easy to observe.
3, high temperature silicone rubber sealing strip, good sealing and thermal Insulation performance, good
7.how heat pump dryers work
High temperature heat pump dryer is to use the inverse Carnot principle, absorb free heat in the air and transfer it to the drying Warehouse, to achieve the drying room temperature increase, with the Corresponding dehumidification and drainage equipment to achieve the drying of Materials.Heat pump dryer by compressor - heat exchanger (internal machine) - Throttling device - heat Receiver (external machine) - compressor and other Devices constitute a refrigerant circulation system.under the action of refrigerant In the compressor circulating in the system, it made within the compressor gas Booster heating process (temperature up to 100 ℃), it enters the release of the High-temperature heat Drying room air, while being cooled and translated into flow liquid when it Runs to the outside machine, liquid evaporation heat quickly again into gas, the temperature dropped to minus 30 ℃, 20 ℃, the air surrounding the heat absorber will continue to Transfer heat to the refrigerant.the continuous Circulation of refrigerant Realizes the transfer of heat from the air to the drying room to heat the air Temperature in the room to achieve the purpose of drying materials.5. Waste Heat recovery system: the drying system has a total of 3 waste heat recovery Lines, which can minimize the loss of heat and achieve high efficiency.
8.Composition of heat pump drying system
1. Main machine (heating system): absorbs free heat from the air with little electric energy input, and USES it to dry materials.
2, drying room: used for placing materials, and insulation to avoid heat loss.
3. Circulating air system: bring heat to every corner of the drying room to raise the temperature of the drying room, and take away Moisture from the materials.
4. Moisture drainage system (drying system): the purpose of Drying is to discharge the moisture with high humidity in the drying room.
5. Waste heat recovery system: the drying system has a Total of 3 waste heat recovery lines, which can minimize the loss of heat and Achieve high efficiency.
6. Drainage system: condensate water is discharged to the Outdoor to avoid increasing the humidity of indoor air.
7, programmable intelligent control system: according to
the most appropriate drying process curve, automatic adjustment of temperature
and humidity, drying time, intelligent operation.
10.Our service
1. Tell buyer's workers how to correct Operation the drying machine free of charge.
2. Equipment guarantee time: 1 year.
3. Our factory implement lifelong service for You, after the warranty period if you have any question of machine, we will be Enthusiastic, resolve customer problems as soon as possible.
11.Delivery and Packing
for heat pump dryer parts---with plywood
for drying chamber +trolleys
If shipped with 20ft container or 40ft container,
No packing
If shipped with LCL( less than container load),
Packed in plywood
12.Company Profile
Jinan xinbeifa
Machinery equipment co., LTD. Has professional designers, experienced technicians
and first-class processing equipment, for the manufacture of naive equipment
Identification a solid foundation. with years of experience, our company has
Independently developed a variety of expanded food equipment and front and rear
End auxiliary equipment, the product sales throughout the country all
Provinces, cities, autonomous regions, more exports to Australia, the
Netherlands, Pakistan, Malaysia, myanmar and other Asian, European, American
Countries.. Our company adhering to the "professional casting quality,
Integrity to win the future" business purposes;In the principle of mutual
Benefit and common development, based on a high starting point, large
Investment, high level of operation;Adhere to high standards, zero defects,
Refined production standards, ensure that every production link, to create a
Safe and high-quality brand.
