After-sales Service Provided: | Engineers available to service machinery overseas |
---|---|
Warranty: | 1 year |
Voltage: | 380hz we can make it according to customers' Local voltage according t |
Brand Name: | XBF |
Condition: | New |
Quick Details
Specifications
1. Product Description
the air heat pump dryer is finned evaporator, compressor, fin condenser (machine) and expansion valve of four parts, by making the working medium continuously complete evaporation (absorb heat from the outdoor environment) to compression, condensation (gives off heat drying room) indoors to throttle, thermodynamic cycle process of evaporation, again to the external environment at low temperature in the heat transfer to the drying room, under the action of refrigerant in the compressor circulating in the system.It made within the Compressor gas booster heating process (temperature up to 100℃), it enters the release of the high-temperature heat drying room air, while being cooled and translated into flow liquid when it runs to the outside machine, rapid heat evaporating liquid into a gas again, at the same time, the temperature can fall to - 20 ℃~ 30 ℃, then the air surrounding the heat absorber will continue to transfer heat to the refrigerant.
this drying machine use of heat pump evaporator absorbs heat from the outside air.Or recycling of exhaust gas residual heat in the process of drying.through the work of compressor, the energy transport (transfer) to drying box, drying box of hot air after repeated cyclic heating, absorb the moisture in the material, its cooling humidification, through hot air platoon is wet or the process of condensation, water take the moisture out of the material, and finally realizes the continuous drying of materials.
3.Product Pictures
Drying Flower &tea: Green tea, Puer, Black tea, the Guanyin, etc.
4.Products Details Show
5.the Technical Parametrs of Oven
Model |
XBF-100AB/AB1 |
XBF-100DB1 |
XBF-100GB/GB1 |
Power |
1.0kw |
1.0kw |
1.0kw |
Highest wind tempetature |
65C |
65C |
80C |
Best wind tempetature |
55C~63C |
35C~55C |
65C~78C |
Suitable environmental temperature |
-20C~+40C |
-20C~+40C |
-20C~+40C |
Dewaterability |
≥3.0kg/h (T50C,M80%) |
≥3.0kg/h (T50C,M80%) |
≥3.0kg/h (T50C,M80%) |
Tray Size(mm) |
780*510*40 |
780*510*40 |
780*510*40 |
Size(mm) |
1180*680*1820 |
1180*680*1820 |
1180*680*1820 |
8.Composition of heat pump drying system
1.Main machine (heating system): absorbs free heat from the air with little electric energy input, and USES it to dry materials.
2, drying room: used for placing materials, and insulation to avoid heat loss.
3. Circulating air system: bring heat to every corner of the drying room to raise the temperature of the drying room, and take away moisture from the materials.
4. Moisture drainage system (drying system): the purpose of drying is to discharge the moisture with high humidity in the drying room.
5. Waste heat recovery system: the drying system has a total of 3 waste heat recovery lines, which can minimize the loss of heat and achieve high efficiency.
6. Drainage system: condensate water is discharged to the outdoor to avoid increasing the humidity of indoor air.
7, programmable intelligent control system: according to the most Appropriate drying process curve, automatic adjustment of temperature and humidity, drying time, intelligent operation.
8. Early warning system: early warning can be set according to the requirements of the user, according to the time, temperature, humidity and other parameters, convenient to remind the user.
9.the advantages of dryers
1, stable, not restricted by the weather: whether cloudy days and rainy days, day and night, wind and snow, all-weather stable operation.
2. Energy saving and high efficiency: using clean electric energy to work, the drying operation cost is only 40% of oil drying equipment, 60% of coal drying machine and 30% of electric heating drying machine, saving more than 60% of energy compared with ordinary drying equipment.A closed dehumidification mode is adopted, without discharging waste heat to the outside world.Patented level 3 waste heat recovery technology, rapid discharge of water while your heat loss.
3. Good effect: the finished product after drying has a good appearance;High active components;Uniform drying, 360 degrees without dead Angle drying.
4. Small footprint and easy installation: the equipment only needs a small installation site;Drying room on site assembly is simple and convenient.
5, intelligent, unattended: the touch screen programmable intelligent control system, a key to start the unit automatic operation, no need to turn over materials, no need to replace the baking tray and cart, no need for special guard
10.Our service
1. Tell buyer's workers how to correct operation the drying machine free of charge.
2. Equipment guarantee time: 1 year.
3. Our factory implement lifelong service for you, after the warranty period if you have any question of machine, we will be enthusiastic, resolve customer problems as soon as possible.
11.Delivery and Packing
for heat pump dryer parts---with plywood
for drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood
12.Company Profile
Jinan xinbeifa machinery equipment co., LTD. Has professional designers, experienced technicians and first-class processing equipment, for the manufacture of naive equipment identification a solid foundation. with years of experience, our company has independently developed a variety of expanded food equipment and front and rear end auxiliary equipment, the product sales throughout the country all provinces, cities, autonomous regions, more exports to Australia, the Netherlands, Pakistan, Malaysia, myanmar and other Asian, European, American countries.. Our company adhering to the "professional casting quality, integrity to win the future" business purposes;In the principle of mutual benefit and common development, based on a high starting point, large investment, high level of operation;Adhere to high standards, zero defects, refined production standards, ensure that every production link, to create a safe and high-quality brand.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.