Automatic fire hydrant box roll forming machine for production different size cabinet 

Shenzhen Superda Machine Co., Ltd fire box Roll Forming accuracy
A. Shear length tolerance: ≤±0.3mm/m
B. Width tolerance: ≤± 0.3mm
C. Sickle bending: ≤2mm/m
D. Burr: ≤0.1mm ()
E. Height tolerance: ≤±0.3mm
above tolerance with flat edgeless one-stage steel coil as a prerequisite.
Surface quality: the surface of the finished product after processing does not add any processing defects.

 production line

Roll forming machine for production fire fighting box, fire house box, fire safety equipment box, fire hose cabinet.

7. Other parameters of the equipment
A. Power supply: 380V/50HZ/3PH, can customized as per user country.
B. Installed capacity: about 31kw.
C.Forming speed: 0-13m/mind.
D.Shearing method: Servo front shear
E. Drive motor: Unwinder motor 4KW.
 leveling motor 2.2KW.
Hydraulic punching cutting and hydraulic tensioning motor (two sets) 11KW+7.5KW. Forming main engine 5.5KW.
Servo motor 2KW
F. Floor area (approx.): length 24m width 3m (host specification 7mX1.7m)
G Production line direction: from left to right (on the console facing the unit).
H. Equipment color: (customer selection)
I. Superda fire house box equipment design can meet 12 hours of continuous production
J. Operating environment
1: Power supply voltage: 380V ± 10% / three-phase four-wire,frequency: 50HZ Total power: about 31KW2: Environment Temperature: 0-40 ° C, relative humidity: 60-95% RH.