PVC WPC Building Template/Board Extrusion Line (LMSB80/156)

Introduction:
this machine is designed to produce PVC/WPC foam board, also called WPC celuka foam board, WPC crusted board, construcation board etc. this kind of boards not only have the appearance of natural wood, but also overcome the shortcomings of natural wood, with anti-corrosion, moisture-proof, anti-moth-eaten, high stability, non-crack characteristics, widely welcomed by customers.

Specifications:
1. Width: 1000-2250mm,
2. Thickness: 2-30mm

Applications:
Wood-plastic foam board is mainly used in wall board, siding, decking boards, packaging and logistics with the combination of pallets, construction lumber, storage racks, also making decorative borders, fences, stair handrails and so on.

Technical Data for this Machine
1. SJSZ-80/156 conical twin screw extruder
Screw diameter (mm): 80/156
Rotating speed of screw: 1-36.5 rpm
Cooling mode of screw: Circulation oil cooling
Power of main motor: 75KW
Power of feeder motor: 2.2KW
Vacuum pump power: 4KW
Output: 300-360kg/h
Main electrical parts: ABB inverter, RKC thermocontroller, Schneider Contactor, Siemens swiches/PLC

2. SDX1220 calibration table with film laminating device
Number of calibrator moulding board: 3 groups + 1 group of cooling roller
Calibration mode: Hydraulic pressure clamping, stable running
Launder structure: 304 stainless steel; All parts with anti-corrosion treatment.
Outer dimension (mm): 2000mm 2200mm 2700mm

3. SQY1220 haul-off unit
Max hauling force: 50KN
Max hauling speed: 0.1-2.5m/min
Number of haul-off roller: 6 groups
Caterpillar clamping mode: Air pressure
Specification of roller: φ 210 1500
Motor power: 3.3KW
Motor Speed Control: ABB Frequency Inverter
Outer dimension (mm): 3000mm 2300mm 2250mm

4. SQB1220 two-edge saw cutting unit
Motor power: 1.5KW
Adjusting mode of cutting unit movement: Horizontal movement by screw mandrel
Vertical movement by cylinder
Dust cleaning blower: 3KW

5. QG1220 cross saw cutting unit
Motor power: 3KW stepless frequency conversion control
Fore-back synchronizing movement motor: 0.55KW stepless frequency conversion control
Cross movement motor power: 0.37KW stepless frequency conversion control
Dust cleaning blower: 3KW
Length metering unit: Made by OMRON
Outer dimension (mm): 3650mm 2510mm 1900mm

6. SFL1220 stacker
Stacker structure: Aluminum-alloy & plastic pulley block
Outer dimension (mm): 4000mm 1800 mm 1320mm

7. Foam Board extrusion mould
Product width: 1220mm
Product thickness: 3-20-25mm
Mould Width: 1350mm
Mould adjustable thickness: 3-20-25mm
Heating component: Stainless steel heating rod
Polishing precision: 0.05-0.06(μ N)
Mould installation mode: Flat extrusion installation

8. Other accessory machines:
SRL-Z 300/600 High Speed Hot and Cold Mixer
SWP-450 Plastic Crusher
SMP-400 Plastic Pulverizer

Service by Qingdao Leader Machinery Co., Ltd.

Pre-sale service:
to provide information and market research,to provide consultation,to provide many kinds of conveniences and market service,etc. Products: PVC Foam Board Machine...
the main purpose of pre-sales service is to help customers make the project planning and system requirements analysis. Make our products maximum to meet clients' requirements. Also play the greatest overall economic benefits of customers' investment.

after-sale service:
to install products and test products freely for customers.
to provide the formulas and technologies of relevant products and the information of chemical materials manufactories.
to direct technology aspect of relevant use according to customers' requirements
to provide technical training for clients' employees.
to be responsible for maintenance service, door-to-door service under the necessary circumstance.
Technology support:
to provide installation and test for the machine.
to provide formulas and technology of relevant products.
to provide information of chemical material manufactories.
to provide technical training for clients' employees.