Usage: | Impact Testing Machine |
---|---|
Power: | Electronic |
Brand Name: | KRD10 |
Warranty: | 3 |
weight: | 2500 |
Quick Details
Specifications
Functions and features:
A stable Windows-based control system:It is a fully Automated remote control interface, where operator enters simple numeric value To enable the KRD90 series of shock /bump measurement controller to accomplish Shock test.
Multi-rail guide shaft:It combines with balanced hydraulic lift system which enjoys good lubricity, causes no Noise, and locates the table fully automatically.
Automated height control:When the Height setting is done, computer will automatically control the lift height of Table, which is of high accuracy and of good repeatability.
Forged or cast aluminum table of high Performance:Forged or cast aluminum table provides a higher strength and Hardness, a higher first-order resonance frequency, little noise, no clutter.
the most reliable brake system:Built-in Braking mechanism which prevents a secondary rebound can locate the table more Safely.
A wide variety of waveforms:Different Kinds of waveform generators can be replaced to perform general half sine wave, Final peak sawtooth wave, square wave etc.
Easy installation:the device is Equipped with buffer vibration barrier of high performance and needs no special Foundation for easy and reliable installation.
Perfect measurement system:There are a Wide variety of waveform tolerance zones in the system memory that it is easy for Users to adjust and apply, and the test report will be generated automatically When the test comes to an end.
System Compatibility:It is compatible with many kinds of measurement Analysis software, which offers users more choice space.
Model Parameters |
KRD 102 |
KRD 105 |
KRD 1025 |
KRD 1050 |
KRD 10100 |
KRD 10200 |
KRD 10400 |
KRD 10600 |
KRD 101000 |
KRD 101500 | |
Rated Load (kg) |
2 |
5 |
25 |
50 |
100 |
200 |
400 |
600 |
1000 |
1500 | |
Table Size (mm) |
115115 |
200200 |
300300 |
500500 |
600600 |
800600 |
1000800 |
10001000 |
12001000 |
15001200 | |
Peak Acc. (g) |
Half-sine |
5~3k |
20~2K |
15~3k |
15~600 |
15~600 |
15~300 |
15~200 | |||
Post-peak Sawtooth |
\ |
10~100 |
15~100 |
15~200 |
15~100 |
10~50 | |||||
Trapezoid |
\ |
15~100 |
15~50 | ||||||||
Pulse Duration (ms) |
Half-sine |
0.2~30 |
0.3~11 |
0.3~11 |
1~30 |
1~30 |
1~30 |
2~30 |
6~30 | ||
Post-peak Sawtooth |
\ |
1~18 |
1~18 |
3~18 |
3~18 |
3~18 |
6~18 | ||||
Trapezoid |
\ |
6~18 | |||||||||
Overall Dimensions (mm) |
450 180 2100 |
1000 900 2200 |
1400 120 2300 |
1600 1400 2300 |
1700 1500 2300 |
1700 1500 2300 |
1900 1500 2450 |
2000 1500 2450 |
1900 1800 2550 |
2200 1800 2550 | |
Weight (kg) |
350 |
550 |
1200 |
3000 |
3100 |
3800 |
4200 |
5100 |
7100 |
8500 | |
Power |
None |
AC220V 50/60Hz |
AC380V±10%,50/60Hz | ||||||||
Standards |
MIL-STD-810F, IEC68-2-27 |
Half sine waveform generator of fixed Pulse width is made of engineering rubber vulcanized on the baseboard, Different pulse width can be available depending on the different combinations Fo stiffness and thickness.
Adjustable half sine waveform generator Can adjust the extending length to change the pulse width which ranges from 3 To 11ms by rotating the jacket. Moreover, pulse width which ranges from 3 to 40ms is adjusted easily by adding a mounting pad.
Multi-function waveform generator is comprised of special cylinder which generates final peak sawtooth wave and trapezoidal Wave. It adjusts the air pressure to adjust the max. Overload of the terminal Peak trapezoidal wave. the air source to cylinder is high-pressure nitrogen Whose pressure ranges from 1 to 10MPa,and a couple of multi-function waveform Generators can be applied in a device and the overload can be adjusted within the range of 10 to 100g.
Square wave waveform generator which is
Made up of special cylinder adjusts the air pressure to adjust the maximum
Overload and pulse width. the air source to the cylinder is high-pressure
Nitrogen whose pressure ranges from 1 to 10MPa and whose overload can be
Adjusted from 10 to 100g.