System features

  Multiple support points are Applied in the measurement system where there is not a high requirement for Leveling, it is necessary to conduct a leveling procedure when the instrument Is first installed and not necessary to level again in the measurement process, Which is easy to operate.

  Linear guide rail is designed for the table, where 2 brackets which can be located accurately can move Upwards and backwards very smoothly. It is flexible and easy to attach the Specimen to anywhere in the bracket

  It is easy to fix the large-diameter and cone specimen to the installation bracket which can be adjusted Horizontally and vertically. Furthermore, it is very easy to level the Cone-shape specimen in the bracket whose left and right is adjusted by a lead Screw.

  High-precision calibration Software for the measurement system can calibrate and assess sensor location and system precision accurately to implement the self-calibration.

  the mass, centroid and Centroidal deviation can be measured as it is necessary to hoist the product for once. Operator only needs to turn the specimen to 0°,90°,180° and 270° without any other operation in the course of measurement, which takes up short Time, offers efficiency and requires little labor intensity.

High-precision series

the One using a electronic balance which offers a higher measurement accuracy can Be used when the measuring range is no greater than 200kg. the measurement Error of radial centroid is less than 0.02mm and the measurement error of Longitudinal centroid is less than 0.05mm.