SC APC SC UPC Dual Round Duplex 2.0mm Single Mode Fiber Optic Pigtail PVC

Pigtails are used for splice applications when terminating outside plant cable. It's consists of a

 

Connector and a special length of fiber cable. Meets Telcordia GR-326 Core and ROHS

 

Requirements. All of OMC pigtails are factory inspected and tested, with available interferometer

 

Data upon request.

OMC's pigtails are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.

Connector's Standard:

SC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.

 

 

Application

1.Optical fiber communication systems engineering.

2.Fiber optic data communication network.

3.Fiber CATV engineering.

4.Other optical technology tests. 

 

 

 

Features

1.100% pre-terminated and tested in factory to ensure transfer performance.

2.Rapid configuration and networking, reduce installation time.

3.Supports 40G and 100G network applications.

4.Low insertion loss and added loss.

5.Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available.

6.High back loss, small volume, light weight.

7.End-face geometry and quality superior than IEC and Telcordia standards.

8.LSZH, OFNP, OFNR cable jacket.

9.Mechanical performance: IEC 61754-20 standard.

10.RoHS and REACH materials compliant.

 

Optical Specification

Connector	SC	Jacket OD(mm)	2core, 4.0mm
Fiber Mode	9/125μm	Jacket Color	Yellow
Polish	APC, UPC	Wavelength	SM: 1310/1550nm
Cable Type	Duplex	Jacket Material	LSZH/PVC
Insertion loss	≤0.3dB(IEC Grade C)	Insertion loss	≤0.12dB(IEC Grade B)
Return loss	MM PC ≥ 30dB(min)	Interchangeability &Vibration	≤0.2dB
Operating temperature	-40~75°C	Storage temperature	-45~85°C

 

 

End-face Quality (SM)

Zone	Range (μm)	Scratches	Defects	Reference
A: Core	0 to 25	None	None	IEC 61300-3-35:2015
B: Cladding	25 to 115	None	None
C: Adhesive	115 to 135	None	None
D: Contact	135 to 250	None	None
E: Rest of ferrule		None	None

 

 

Length Tolerance

Overall Length(L)(m)	Length of tolerance(cm)
0<L<1	+5/-0
1<L<10	+10/-0
10<L<40	+15/-0
40<L	+0.5% x L/-0