1.Brief Introduction:

  GMT (Glass Mat reinforced Thermoplastics) ,or glass fiber reinforced thermoplastic composite material, which is made of Glass fiber as a reinforcing material and a thermoplastic resin as a matrix. It Is a composite material made by heating and pressing. through Heating and pressurizing of them. It is currently an extremely active composite Materials in he world and is considered one of the most promising new materials In the 21st century.

 

2.Techincal parameters:

 

3.Performance features:

Wearable

76D/surface GMT pallet hardness shore 76D

100 minutes vibration with materials and pressure, Block machine screw off, pallet is not destructed, surface wear is about 0.5mm

Low temperature resistance

Being used at minus 20degrees, GMT pallet Will not deform or crack.

High temperature resistance

GMT pallet  is able to withstand high temperature of 60-90 degrees, will Not easily deform. And suitable for steam curing.

Good Rigidty

No bending, no deformed under high power and Pressure. Smooth and flat surface.

High cost-effective of GMT pallet.

Annual breakage rate: Bamboo plywood is about 50%,PVC pallet is about 15%,GMT pallet less than 1%.

Size 850*680 pallet for example, 2000 plates to calculate: the annual cost =the number of pallets*unit price*the annual breakage rate

Bamboo Plywood annual cost=2000pcs*USD6*50%=USD6,000;
PVC pallet annual cost= 2000pcs*USD10*15%=USD3,000;
GMT pallet annual cost= 2000pcs*USD11*1%=USD220;