| Brand Name: | T C I |
|---|---|
| name: | 1 |
| Material: | PP |
| application: | I |
| Type: | 50 |
| Model Number: | 50 |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Products Introduction of Plastic Ralu Ring
Plastic Ralu Ring is an improved pall ring, their open structure ensures a regular flow through the packed bed resulting in a minimal pressure drop.
Plastic ralu rings are made of heat resistant and chemical corrosion resistant plastics including PP, PE, RPP, PVC, CPVC and PVDF.
Plastic Ralu Rings are featured with high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from
Plastic ralu ring is widely apply in all kinds of separation, absorption and desorption device, atmospheric and vacuum distillation device, decarburization and desulfurization system, ethylbenzene, iso-octane and toluene separation.
Technical Specification of Plastic Ralu RingProduct name |
Plastic ralu ring | ||||
Material |
PP, PE, RPP, PVC, CPVC, PVDF, etc | ||||
Life span |
>3 years | ||||
Size inch/mm |
Surface area m2/m3 |
Void volume % |
Packing number pieces/ m3 |
Packing density Kg/m3 | |
3/5" |
15 |
320 |
94 |
170000 |
80 |
1" |
25 |
190 |
88 |
36000 |
46.8 |
1-1/2" |
38 |
150 |
95 |
13500 |
65 |
2" |
50 |
110 |
95 |
6300 |
53.5 |
3-1/2" |
90 |
75 |
90 |
1000 |
40 |
5" |
125 |
60 |
97 |
800 |
30 |
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. | ||||
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. | ||||
Application |
It is widely apply in all kinds of separation, absorption and desorption device, atmospheric and vacuum distillation device, decarburization and desulfurization system, ethylbenzene, iso-octane and toluene separation. | ||||
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). the temperature
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation temp.(℃) |
90 |
100 |
120 |
60 |
90 |
150 |
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression strength(Mpa) |
6.0 |
6.0 |
6.0 |
6.0 |
6.0 |
6.0 |