Model, YX100-600

Cable tray machine is the equipment for production cable tray.

Choice of Cable tray

in the engineering design, the layout of the cable tray should be comprehensively compared according to economic rationality, technical feasibility, operational safety and other factors to determine the best solution, and it must also fully meet the requirements of construction and installation, maintenance and repair and cable laying.

the height of the cable tray from the ground is generally not less than 2.5m when the bridge is laid horizontally, and a metal cover shall be added to protect the part below 1.8m from the ground when it is laid vertically, except when it is laid in a dedicated electrical room. the cable tray is laid horizontally in the equipment mezzanine or the road and is less than 2.5m. Protective grounding measures shall be taken.

Cable tray, trunkings and their hangers are used in corrosive environments and should be made of corrosion-resistant rigid materials. Or take anti-corrosion treatment, the anti-corrosion treatment method should meet the project

5.3 Correcting table

Type: roller supporting, correcting

Functions and Structure: correcting and with steel. Correcting device mainly consists of a pneumatic Prime bridge, roller, vertical roll-oriented composition. Guide wheels can be easily to adjust to different width. Galvanized rollers is beautiful and flexible.

 

5.4 Servo feeding machine

F  type: servo feeding

F  functions and Structure: Pinch and be with steel to the press machine. Polyurethane roller ensure that the feeding force. Feeding  each error of feeding be controlled in rang of ± 0.15mm. Compared with the servo Clamp, feed length setting is more flexible, adapt to a wider range. this feeding device is more suitable for wide material, can effectively improve the feeding accuracy. Servo motor, measuring devices, digital control system are the imported components.

Technical parameters:

Maximum number of feeding: 30 ~ 40 times / min (adjustable)

Feeding step: 100MM / step (adjustable).

 

5.10 Forming machine:

Type: double cantilever gear drive, width adjustable universal forming machine and the overall mobile, fast (waist height and width) exchange specifications.

Function and structure: sheet metal is rolled form by 20 stand rolls, gradually into finished cable tray. Consist of the speed AC motor, reducer, high-precision linear guides, left and right gear box, lateral adjustment mechanism, the roller group composition. A set of rollers to complete all the specifications of the cable tray, adjusting the position of roller frame to achieve replacement of specification.

Technical parameters:

the number of horizontal roll stand: about 20

Machine shaft: (specifically adjusted according to actual situation)

the level of roller distance: about 350-550mm

Motor power: 18.5KW

Line speed: 10-15m/min

5.11 Collection table

Type: Finished cable tray arrive collection table, worker will collect products, non-powered roller.

Function and structure: consist of section steel (square pipe), no power roller assembly, welding, play a role in supporting finished product,can adapt 8-meter finished product.

 

5.12 Electrical control system

the whole line adopt imported PLC control, touch screen be used for human-machine interface,  achieving the interaction between man and PLC.