Product Description

Sewage treatment plate heat exchanger is the front-end product of sewage source heat pump system, mainly used to extract the heat  in winter from urban original sewage, industrial waste water, slag water, printing and dyeing waste water. Heat is transferred to heat pump unit through intermediate water exchange, then finish heating for the building through the heat pump unit. In summer, heat inside the building is transferred to the sewage to play a cooling role.

Product Picture

 

 

Technical Parameters

Max.Design pressure: 1.2MPa

Design temperature: 90℃

Max. Heat exchange area: 500m2

Flow rate: 400m3/h

 

Product Feature

the unique single-pass wide channel design of sewage treatment heat exchanger can not  only satisfy heat exchange area, but also furthest avoid blocking of  heat exchanger caused by impurities in the sewage. by limiting sewage flow rate in sewage treatment plate heat exchanger, the sediment caused by sewage impurities on the surface of heat exchanger can be avoid so that it wont affect heat exchange efficiency. Additionally cleaning and maintenance is convenient after trial due to simple structure and easy operation.,flow in the heat exchanger of the sewage treatment plate.

 

Product Advantage

Sewage treatment plate heat exchanger plays an important role in environment-protected building and energy-saving. Facing problems of soil heat pump and ground-water heat pump development, the sewage heat exchangers effectively solve the problems of sewage usage, for example, In sewage utilization,urban sewage' scaling, blocking, corrosion etc, which enables the heat pump to utilize the urban raw sewage to promote the further development of heat pump.