Type: | Other Type |
---|---|
Seals Type: | Non-sealed |
Outside Diameter: | 40-125 mm |
Bore Size: | 25-42 mm |
Brand Name: | R&B |
Type: | Sprag |
Place of Origin: | China (Mainland) |
Precision Rating: | P0 |
Model Number: | B205 |
Material: | GCR15 |
Applicable Industries: | Manufacturing Plant, Machinery Repair Shops |
Quick Details
Specifications
the following example is for you reference.
1.Brief Introduction:
Type S200 B200 is a Non bearing supported sprag type freewheel. the sprags run directly on the shaft provided by the user. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
A typical arrangement is to install this type alongside a bearing as shown on the following page. the housing bore to receive the outer race will be machined with a H7 tolerance. A key will transmit the torque. the shaft on which the sprags run must have a surface hardness of HRc 60 to 62 for a finished depth of 0,6 mm minimum. Core hardness should be HRc 35 to 45. Surface roughness must not exceed 22 CLA. Maximum shaft taper 0,01 mm per 50 mm length.Concentricity between shaft and housing
Bore should be maintained within TIR 0,05 mm.
the preferred lubrication is oil. the Stieber design allows the use of most of the common lubricants used in power transmission including gear oils with EP additives. When necessary grease lubrication is also possible.
2.Techincal parameters: Model Torque Capacity (N.M) Drag Torque (N.M) Max.Overrunning (r/min) Max.Idexing (cycle/min) A(+0 to -0.6) B Keyway with JIS Bearing No. Shaft Dia. C(+0 to -0.025) Weight (kg) Shaft Outer Race B203 39.2 0.10 2400 500 150 25.0 40(-0.014-0.039) 4X2.5 6203 16.510 0.23 B204 58.8 0.10 2400 500 150 25.0 47(-0.014-0.039) 5X3 6204 18.796 0.34 B205 98 0.20 1800 400 150 25.0 52(0.017-0.042) 5X3 6205 23.622 0.45 B206 235 0.20 1800 350 150 28.0 62(-0.017-0.042) 7X4 6206 32.766 0.68 B207 372 0.20 1800 300 150 28.0 72(-0.0170.042) 7X4 6207 42.088 0.80 B208 549 0.20 1800 200 150 32.0 80(-0.017-0.042) 10X4.5 6208 46.761 0.91 B209 549 0.20 1800 200 150 32.0 85(-0.020-0.045) 10X4.5 6209 46.761 0.95 B210 784 0.29 1200 200 150 32.0 90(-0.020-0.045) 10X4.5 6210 56.109 1.00 B211 784 0.29 1200 200 150 32.0 100(-0.020-0.050) 10X4.5 6211 56.109 1.40 B212 1230 0.29 1200 180 150 42.0 110(-0.020-0.050) 10X4.5 6212 70.029 1.80 B213 1230 0.29 1200 180 150 42.0 120(-0.020-0.050) 10X4.5 6213 70.029 2.30 B214 1390 0.39 180 180 150 42.0 125(-0.024-0.060) 12X4.5 6214 79.356 2.4
3.Performance features:
Type S200 B200 is a Non bearing supported sprag type freewheel. the sprags run directly on the shaft provided by the user. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.