Technical Data AC EV Charger 22KW AC EV Charger

General Requirements

1 EV charger Type: AC

2 Charger Capacity: 22KW

3 Model No.: ENC-ACL022A

4 Mounting: Ground-mounted

Input Requirements

5 AC Supply System: Three-Phase, 5 Wire AC system

6 Nominal Input voltage: 380V (+20% and -20%)

7 Input frequency: 50Hz, ±1.5Hz / 60Hz, ±1.5Hz

Environmental Requirements

8 Ambient Temperature Range: -25 to 55°C

9 Ambient Humidity: 5 to 95%

10 Storage temperature: -40 to 70°C

Mechanical Requirements

11 IP Ratings: IP 54

12 Cooling: Air cooled

Output Requirements

13 Number of outputs: 1

14 Type of each output: 380V (+20% and -20%) three phase, 16Amp

15 Output Current: 16 Amp

16 Output Connector Compatibility AC: IEC-61851-22, IEC 62196-2 Mode 3, Type 2

User Interface & Display Requirements

17 Display & Touch-screen size: 4.3 inches

18 User Authentication: Mobile application or User interface / QR Code/RFID Card /Password Login

19 Metering Information: Consumption Units

Communication Requirements

20 Communication between EVSE and Central Server: OCPP 1.6 protocol

21 Interface between Charger and CMS: Ethernet and GPRS Modem

Protection & Safety Requirements

22 Safety Parameters: over current, under voltage, Residual current, Surge protection, leakage

Protection, Short Circuit, over

Temperature, etc.

23 Power failure: If There is a power failure, user is indicated about this.