| Switch Operation: | (On)-Off-(On) |
|---|---|
| Maximum Operating Temperature: | +85°C |
| Minimum Operating Temperature: | -40°C |
| Mechanical Life: | 150000Operations |
| DC Voltage Rating: | 24V |
| Panel Cut Out Width: | 21.08mm |
| Brand: | Apem |
| Contact Current Rating: | 5 A |
| Operating Temperature Range: | -40 → +85°C |
| Panel Cut Out Size: | 36.8 x 21.08mm |
| Mounting Type: | Panel Mount |
| Illuminated: | Yes |
| Contact Configuration: | Double Pole Double Throw (DPDT) |
| IP Rating: | IP68 |
| Case Material: | Nylon 66 |
| Contact Material: | Silver |
| Terminal Type: | Quick Connect, Solder |
| Contact Resistance: | 10mΩ |
| Actuator Shape: | Rectangular |
| Panel Cut Out Height: | 36.8mm |
Quick Details
Specifications
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminals
Available in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)
A large variety of switch configurations and actuator colours/markings available
Suitable actuators should be ordered separately (see typically 507-267 and range)
To facilitate wiring harness preparation and quick panel assembly, all double pole switch cases can also be used with rear crimp connector housing 507-576, accepting up to 10 crimps terminals (except for 507-431, which can be used with connector housing 507-560)
Other accessories include switch case housings 507-611 & 507-615, panel blanking plugs 507-318 and actuator removal tool 507-312
Switch case panel knockout 36.80x21.08mm
Operating Temperature -40 to +85 °C
Contact Resistance 10 mΩ
Dielectric Strength 2,000 Vrms 50 Hz min. between terminals