| Minimum Operating Temperature: | -10°C |
|---|---|
| Maximum Operating Temperature: | +50°C |
| Best Accuracy: | ±2% + 0.5 A |
| Safety Category: | CAT III 600 V |
| Maximum Conductor Size: | 30mm |
| Brand: | Fluke |
| Safety Category Level: | CAT III |
| Safety Category Voltage: | 600V |
| Output Type: | Voltage |
| Adapter Type: | AC/DC |
| Connector Type: | 4 mm Plug |
| Maximum DC Current: | 1000A |
| Battery Type: | 9V |
| Battery Life: | 60 h |
| Model Number p: | I1010 |
| Maximum ac Current: | 600A ac |
Quick Details
Specifications
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V