| Minimum Operating Temperature: | -10°C |
|---|---|
| Maximum Operating Temperature: | +55°C |
| Best Accuracy: | ≤ 0.35 % |
| Safety Category: | CAT III 600 V, CAT IV 300 V |
| Maximum Conductor Size: | 115mm |
| Brand: | Chauvin Arnoux |
| Safety Category Level: | CAT III, CAT IV |
| Safety Category Voltage: | 300 V, 600 V |
| Output Type: | Current |
| Adapter Type: | AC |
| Connector Type: | 4 mm Plug |
| Cable Length Extended: | 1.5m |
| Model Number p: | B102 |
| Maximum ac Current: | 400A ac |
Quick Details
Specifications
The B102 current clamp is designed for measuring leakage current diverted towards the earth. It enables the fault to be located or anticipated without disconnecting the equipment linked. The current clamp is specially designed to detect low fault currents on power circuits.
The measurements can be made on any type of installation: single-phase, 3 or 4 wire threephase, balanced or not, with the neutral grounded earth or impedant
Differential or leakage current, from 500 μA
Current up to 400 A max
2 measurement ranges: 4 A AC / 400 A AC
Bandwidth: 48 Hz to 1000 Hz
Output: 1.5 m cord with double insulation having male safety plugs 4mm in diameter
The measurements can be made on any type of installation: single-phase, 3 or 4 wire threephase, balanced or not, with the neutral grounded earth or impedant
Differential or leakage current, from 500 μA
Current up to 400 A max
2 measurement ranges: 4 A AC / 400 A AC
Bandwidth: 48 Hz to 1000 Hz
Output: 1.5 m cord with double insulation having male safety plugs 4mm in diameter