| Installed Memory: | 1 MB |
|---|---|
| Brand: | Rabbit Semiconductor |
| Minimum Operating Temperature: | -40°C |
| Maximum Operating Temperature: | +85°C |
| Length: | 146mm |
| Height: | 16mm |
| Core Processor: | Rabbit 4000 |
| Supported Memory: | 1x SRAM |
| Dimensions: | 96 x 146 x 16mm |
| Supported Network Interfaces: | 10 Base-T |
| Number of Memory Sockets: | 1x |
| Supported I/O Interfaces: | Ethernet, RS232 x 3, Wireless |
| Width: | 96mm |
| Processor Clock Speed: | 40MHz |
Quick Details
Specifications
The BL4S110 is an industrial-quality SBC based on the Rabbit 4000 microcontroller designed specifically for embedded control, communications and Ethernet connectivity. The Dynamic C programming environment reduces development time and a full TCP/IP stack with source code is provided royalty-free.
• 40MHz Rabbit 4000 MPU with extended low-power 'sleepy' modes • On-board 1MB serial Flash program memory
• On-board 512KB program execution SRAM
• On-board 512KB data SRAM
• 10Base-T Ethernet connectivity via RJ45 socket
• 12 x protected (±36Vdc) digital inputs
• 8 x digital outputs (sink 200mA each @ +36Vdc max)
• 1 x RS-232 + RTS/CTS, 2 x RS-232 or 3 x UART serial ports
• 8 x 11-bit analogue input channels (Four can be set up for 4-20mA current loop comms)
• Battery-backed Real-Tme Clock (RTC)
• Watchdog supervisor
• Screw-terminal GPIO connectors
• CR2032 coin-cell holder for RTC back-up
• Socket for optional Digi XBee ZigBee wireless module
• Power supply: +9 to +36Vdc via Micro-Fit connector
• Operating temperature range: -40 to +85°C
• Dimensions: 146 x 96mm
• 40MHz Rabbit 4000 MPU with extended low-power 'sleepy' modes • On-board 1MB serial Flash program memory
• On-board 512KB program execution SRAM
• On-board 512KB data SRAM
• 10Base-T Ethernet connectivity via RJ45 socket
• 12 x protected (±36Vdc) digital inputs
• 8 x digital outputs (sink 200mA each @ +36Vdc max)
• 1 x RS-232 + RTS/CTS, 2 x RS-232 or 3 x UART serial ports
• 8 x 11-bit analogue input channels (Four can be set up for 4-20mA current loop comms)
• Battery-backed Real-Tme Clock (RTC)
• Watchdog supervisor
• Screw-terminal GPIO connectors
• CR2032 coin-cell holder for RTC back-up
• Socket for optional Digi XBee ZigBee wireless module
• Power supply: +9 to +36Vdc via Micro-Fit connector
• Operating temperature range: -40 to +85°C
• Dimensions: 146 x 96mm