| Minimum Operating Temperature: | 0°C |
|---|---|
| Maximum Operating Temperature: | +40°C |
| Width: | 168mm |
| Safety Category: | CAT III 300V |
| Weight: | 1.1kg |
| Power Source: | Battery |
| Non-Trip Loop Test: | Yes |
| Safety Category Level: | CAT III |
| Height: | 85mm |
| Maximum Voltage Measurement: | 300V |
| Model Number p: | KMP7030 |
| Display Type: | LCD |
| Length: | 189mm |
| Brand: | Robin-Amprobe |
| RCD Test Type: | AC Selective |
| PSC Display: | Yes |
| Safety Category Voltage: | 300V |
| Dimensions: | 189 x 168 x 85mm |
| Loop Impedance Test Type: | 3 Wire |
| RCD Test Current: | 25A |
| Battery Type: | AA |
| Best Loop Test Accuracy: | ±2% |
Quick Details
Specifications
Using the KMP7030 Loop testing is a quick, convenient, and highly specific method of evaluating an electrical circuit for its ability to engage protective devices (circuit breakers, fuses, RCD's).A "loop" is defined by including unsuspected elements, where current has found parallel paths to ground. Because a ground loop determines the effectiveness of protective devices, it is crucial to be able to measure it, in order to detect and correct problems.
Non trip loop test on passive RCDs
Instant reading
20, 200 and 2000Ω loop measurement ranges
PSC measurement up to 20kA
Displays mains voltage before test
Instant correct wiring status check
Backlight display
Low battery indication
CAT III 300V
Non trip loop test on passive RCDs
Instant reading
20, 200 and 2000Ω loop measurement ranges
PSC measurement up to 20kA
Displays mains voltage before test
Instant correct wiring status check
Backlight display
Low battery indication
CAT III 300V