3M Wire pulling lubricant used for the everyday pulling of electrical and communication cable. The lubricant is a clear colourless slow drying gel which is very easy to apply. This wire pulling lubricant has a very low residue if less than 5% solids and is exactly what you need when cleanliness is a concern. As a user you can pump, squeeze or apply the lubricant by hand directly onto wires and cables always ensuring the conduits are clean.
FEATURES:
Low residue less than 5% solids
Colourless
Slow drying
Easy to apply
Temperature range -5°C to 49°C

APPLICATIONS:
No wax, grease or silicon added
Non-corrosive to steel, copper and aluminium
Compatible with most common jacket types

PROPERTIES:
5% non-volatile content
VOC content 50 gm/litre
Viscosity 40,000 to 60,000 cps @ 10 rpm
PH 6.5 to 8.00
No flash point the residue is non flammable

SHELF LIFE:
This wire pulling lubricant has a shelf life of 5 years form the date of manufacture when it is stored in a sealed container away from direct sunlight. Storage should be controlled at 10°C to 27°C.