Brand: | Eccel Technology Ltd |
---|---|
Length: | 75mm |
Supported Bus Interfaces: | USB |
Series: | OEM-MICODE |
Width: | 50mm |
Supply Voltage: | 5V |
Component Type: | Reader/Writer |
Quick Details
Specifications
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)
Complete plug-and-go RFID Read / Write system Integrated PCB antenna, LEDS, RS232 or USB interface.
Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
Average current consumption down to 100 micro Amps even when fully active
Auxiliary output options for automatic data output as serial or Wiegand protocol
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)
Complete plug-and-go RFID Read / Write system Integrated PCB antenna, LEDS, RS232 or USB interface.
Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
Average current consumption down to 100 micro Amps even when fully active
Auxiliary output options for automatic data output as serial or Wiegand protocol