| Operating Temperature Range: | -20 → +60 °C |
|---|---|
| Standards Met: | CE, EN 61000-6-2, EN 61000-6-4, IEC, RoHS Complaint |
| Width: | 17.5mm |
| Phase Sensitivity: | Phase Failure, Phase Sequence |
| Maximum Voltage Sensed: | 540V |
| Time Delay: | 0.2 → 10 s |
| Brand: | Broyce Control |
| Minimum Voltage Sensed: | 243 V |
| Contact Configuration: | DPDT |
| Monitoring Application: | Voltage |
| Minimum Operating Temperature: | -20°C |
| Maximum Operating Temperature: | +60°C |
| Terminal Type: | Wire Lead |
| Height: | 66.5mm |
| Special Features: | Microprocessor Based, Detects Incorrect Phase Sequence, Phase Loss And Neutral Loss, Adjustment For Under Voltage Trip Level, Adjustment For Time Delay |
| Electrical Phase: | 3 |
| Voltage Sensing Range: | 243 → 540 V |
| Dimensions: | 89 x 17.5 x 66.5 mm |
| Supply Voltage: | 400 V |
| Mounting Type: | DIN Rail |
| Length: | 89mm |
Quick Details
Specifications
Broyce Controls L-Series signal conditioners use a QR barcode marking method allowing direct access to all technical data sheets, ensuring correct information is always at your finger tips!
Compact 17.5 mm DIN Rail housing Microprocessor based
True R.M.S. monitoring measuring phase to phase (three wire) or phase to neutral (4-wire) voltages
Selectable nominal voltages to suit most popular three wire or 4-wire supply voltages
Monitors own supply and detects an Under voltage condition on one or more phases
Detects incorrect phase sequence, phase loss and neutral loss1
Adjustment for Under voltage trip level
Adjustment for Restart delay
Adjustment for time delay
DPDT relay output 5A
Green LED indication for supply status
Red LED indication for relay status
Compact 17.5 mm DIN Rail housing Microprocessor based
True R.M.S. monitoring measuring phase to phase (three wire) or phase to neutral (4-wire) voltages
Selectable nominal voltages to suit most popular three wire or 4-wire supply voltages
Monitors own supply and detects an Under voltage condition on one or more phases
Detects incorrect phase sequence, phase loss and neutral loss1
Adjustment for Under voltage trip level
Adjustment for Restart delay
Adjustment for time delay
DPDT relay output 5A
Green LED indication for supply status
Red LED indication for relay status