| Maximum Operating Pressure: | 10 bar |
|---|---|
| Manufacturer Series: | PAC50 |
| Connection: | 4 mm Pneumatic Hose, G 1/4 Female, M12 5-Pin |
| Brand: | Sick |
| Minimum Operating Pressure: | 0bar |
| Connection Thread Standard: | G, Metric |
| Minimum Operating Temperature: | 0°C |
| Maximum Operating Temperature: | +60°C |
| Suitable Media: | Air |
| LED Indicator: | Yes |
| IP Rating: | IP65, IP67 |
| Connection Thread Size: | 1/4 in, M12 |
| Pressure Type: | Positive Pressure |
| Output Range: | 0 → 10 V, 4 → 20 mA |
| Voltage Rating: | 17 → 30V dc |
| Contact Operation: | Normally Closed, Normally Open |
Quick Details
Specifications
The SICK PAC50 pressure switch provides an easy to read overview of important system information using a clear bi colour display. Simple to programme making commissioning fast and easy, the PAC50 provides up to 2 switch outputs and an extra analogue output in a rugged casing.
Switched outputs can be programmed to be NPN, PNP or push-pull. Analogue inputs automatically detect whether a voltage or current signal is required simplifying installation and reducing stocking cost.
Integrated pressure switch, transmitter and display
Clear simultaneous display of applied pressure and set points
Colour change when set points are reached
3 large push buttons
DIN rail or panel mounting (via accessory)
Standard M12 electrical connection
PIF connection or 2 x G1/4” female (1 on rear, 1 on bottom)
Switch outputs configurable PNP, NPN, Push-pull. IO Link V1.1.
Analogue outputs configurable 4-20mA / 0-10V
Pressure ranges available -1 to 0 Bar, -1 to +1 Bar, 0 to 6 Bar, 0-10 Bar
Switched outputs can be programmed to be NPN, PNP or push-pull. Analogue inputs automatically detect whether a voltage or current signal is required simplifying installation and reducing stocking cost.
Integrated pressure switch, transmitter and display
Clear simultaneous display of applied pressure and set points
Colour change when set points are reached
3 large push buttons
DIN rail or panel mounting (via accessory)
Standard M12 electrical connection
PIF connection or 2 x G1/4” female (1 on rear, 1 on bottom)
Switch outputs configurable PNP, NPN, Push-pull. IO Link V1.1.
Analogue outputs configurable 4-20mA / 0-10V
Pressure ranges available -1 to 0 Bar, -1 to +1 Bar, 0 to 6 Bar, 0-10 Bar