| Pole and Throw Configuration: | DPDT |
|---|---|
| Width: | 25.4mm |
| Brand: | Honeywell |
| Actuator Type: | Plunger |
| Minimum Operating Temperature: | -32°C |
| Maximum Operating Temperature: | +71°C |
| IP Rating: | IP66 |
| Maximum dc Voltage: | 250V |
| Contact Type: | Snap Action |
| Mounting Orientation: | Vertical |
| Maximum Current: | 10 A |
| Dimensions: | 77.22 x 25.4 x 44.45 mm |
| Normal State Configuration: | 2NO/2NC |
| Housing Material: | Die Cast Zinc |
| Length: | 77.22mm |
| Depth: | 44.45mm |
| Maximum ac Voltage: | 250V |
| Connection Type: | 1/2 in NPT Conduit |
Quick Details
Specifications
The DTE6 limit switch series from Honeywell is designed for use within a medium duty environment. This range of industrial limit switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on the DTE6 side mountable switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
Side mount
Zinc die-cast housing
Side mount
Zinc die-cast housing