| Output Type: | PNP |
|---|---|
| Brand: | Sick |
| Minimum Operating Temperature: | -25°C |
| Maximum Operating Temperature: | +55°C |
| IP Rating: | IP67 |
| Maximum dc Voltage: | 30V |
| Series: | V180-2 |
| Detection Type: | Background Suppression |
| Maximum Current: | 100 mA |
| Detection Range: | 1 450 mm |
| Sensor Style: | Barrel |
| Mounting Type: | Threaded |
| Response Time: | <=0.5 ms |
| Housing Material: | Nickel Plated Brass, PC |
| Light Source: | LED |
| Electrical Connection: | 4-Pin M12 Connector |
Quick Details
Specifications
Sick's VTE180 series of photoelectric proximity sensors are brought to you in a cylindrical M18 housing, they feature scanning distances of 400 mm. They provide a cost-effective solution to lower installation costs.
• Bright lit red emitter LED allows for a more simplified alignment as well as saves installation time
• The sensors have background suppression
• Power and signal LEDs offer quick and simple troubleshooting
• Flat and smooth lens reduces the collection of dust and dirt
• Light spot (distance): 20 mm (400 mm)
• Switching output: PNP, light/dark-switching
• 645 nm wavelength
• Potentiometer with a 270-degree sensing range
• Features a supply voltage of 10V DC - 30V DC
• Switching mode is selectable via L/D control cable
• Comprised of a strong, rugged and robust material
• The enclosure has an IP rating of IP67, this means that the enclosure is protected against dust and is completely dust-tight. This rating also means that the enclosure has moisture protection against full immersion for up to 30 minutes at depths between 15cm and 1m
• Bright lit red emitter LED allows for a more simplified alignment as well as saves installation time
• The sensors have background suppression
• Power and signal LEDs offer quick and simple troubleshooting
• Flat and smooth lens reduces the collection of dust and dirt
• Light spot (distance): 20 mm (400 mm)
• Switching output: PNP, light/dark-switching
• 645 nm wavelength
• Potentiometer with a 270-degree sensing range
• Features a supply voltage of 10V DC - 30V DC
• Switching mode is selectable via L/D control cable
• Comprised of a strong, rugged and robust material
• The enclosure has an IP rating of IP67, this means that the enclosure is protected against dust and is completely dust-tight. This rating also means that the enclosure has moisture protection against full immersion for up to 30 minutes at depths between 15cm and 1m