| Output Type: | Push Pull |
|---|---|
| Brand: | Pepperl + Fuchs |
| Minimum Operating Temperature: | -10°C |
| Maximum Operating Temperature: | +50°C |
| IP Rating: | IP67 |
| Maximum dc Voltage: | 30V |
| Series: | MLV12 |
| Detection Type: | Retroreflective |
| Maximum Current: | 100 mA |
| Detection Range: | 15 m |
| Sensor Style: | Block |
| Response Time: | 0.2 ms |
| Housing Material: | Nickel Plated Die Cast Zinc |
| Light Source: | Laser Light |
| Electrical Connection: | 5-Pin M12 Connector |
Quick Details
Specifications
Automatic adjustment of the switch points ’sensitivity’ through “TEACH IN”
Sensitivity adjustment via membrane keypad or optical interface (e.g. freely selectable time steps)
Multifunction input
Control test input
Visible red light, pulsed laser light - 650nm
Flashing power on LED in case of short circuit
Multiple device installation possible, no mutual interference
Ultra bright LEDs for power on, stability control and switching state
Powerful push-pull output - 200mA for high resistance against noise
Protection class II
Not sensitive to ambient light, even with switched energy saving lamps
Temperature range: -10 → +50°C
Sensitivity adjustment via membrane keypad or optical interface (e.g. freely selectable time steps)
Multifunction input
Control test input
Visible red light, pulsed laser light - 650nm
Flashing power on LED in case of short circuit
Multiple device installation possible, no mutual interference
Ultra bright LEDs for power on, stability control and switching state
Powerful push-pull output - 200mA for high resistance against noise
Protection class II
Not sensitive to ambient light, even with switched energy saving lamps
Temperature range: -10 → +50°C