| Minimum Pressure Reading: | -1bar |
|---|---|
| Maximum Pressure Reading: | 10bar |
| Output Type: | Analogue + PNP-NO/NC Programmable |
| Communication Protocol: | IO-LINK |
| Brand: | ifm electronic |
| Minimum Operating Temperature: | -25°C |
| Maximum Operating Temperature: | +80°C |
| IP Rating: | IP65, IP67 |
| Pressure Reading Type: | Relative |
| Maximum Current: | 250 mA |
| Supply Voltage: | 18 30 V dc |
| Media Measured: | Fluid |
| Response Time: | <1.5 (Minimum Switching Output) ms, <3 (Maximum Analogue Output) ms |
| Analogue Output: | 0 10 V, 4 20 mA |
| Interface: | IO-Link |
| Process Connection: | G1/4 |
| Accuracy: | <±0.4 % |
| Housing Material: | PBT GF20, PBT+PC GF30, PC, Stainless Steel |
| Electrical Connection: | M12 Connector |
Quick Details
Specifications
ifm electronic PN 2xxx series pressure sensors offers a flexible design that allows the sensor to rotate in any direction once fitted. With selectable dual switched NC/NO outputs or a single switched output and a scalable analogue output. The PN pressure sensors continuously evaluate and show system pressure on a large bright 4-digit alphanumeric display. The display can be switched from the indication of “red” to an alternating indication of “red - green”, highlighting switching states.
IO-Link communication
Independent set and reset points
Visualisation of the switching states by clearly visible LEDs
Signal damping, output delay on and delay off times
High overload protection
Highly stable ceramic measuring element is tolerant of overpressures
Low zero offset or drift from ageing, overpressure or temperature
IP 67
IO-Link communication
Independent set and reset points
Visualisation of the switching states by clearly visible LEDs
Signal damping, output delay on and delay off times
High overload protection
Highly stable ceramic measuring element is tolerant of overpressures
Low zero offset or drift from ageing, overpressure or temperature
IP 67