Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been developed to provide a miniature micro-machined diaphragm. These gauge style pressure sensors are the perfect solution for continuous monitoring in hazardous environments.
• Metal seal assembly provides exceptional thermal and stress isolation
• Two-wire electronics includes power supply regulation and amplifier stages
• Independent zero and span controls, zero offset and span setting ±5% site adjustable by sealed, noninteracting potentiometers
• Reverse polarity and over-voltage protection
• RFI bulkhead provides feedthrough filters within the body tube assembly
• The PTX 600 series has a range of 1.5 (100 mbar) through to 10,000 psi (700 bar)
• Rugged compact design
• Great protection against electrical interference
• The transmitter provides an integral female pressure port - 1/4" NPT female
• Fluids compatible with a fully welded assembly of 316 stainless steel and Hastelloy C276 (NACE compatible grades)
• The overall length is 139mm and a diameter of 38mm
• DIN 43650 electrical connector is supplied
• Comprised of hardwearing, aesthetically pleasing stainless steel
• Suitable for use within Zone "O" Gas Group IIC, Temperature Class T4
• G'BSP connection
• Transmitter Supply Voltage: 9-30VDC
• Output Current: 4-20mA (2 wire configuration)
• Temperature effects: less than 0.5% FS over 15° to +122°F- typically 0.3% FS, 15° to +122°
• Gauge configuration (sealed gauge for pressure above 1000 PSI - Absolute for 11.5 to 17 PSI model)